VinylVisions one-of-a-kind quality control laboratory delivers the best, fully tested vinyl window trim solutions on the market. With a six-station step by step Quality Assurance verification process we manufacture a better designed product. Designed for both professional and DIY replacement window installers to cover gaps and seams between the window and wall quickly and decoratively. The white PVC surface matches most white PVC replacement windowsills and frames. Each piece is pre-scored to make trimming to the correct width easy and measure free. Don’t waste time using double sided tape, each piece is pre-taped to save time and make installation frustration free.
TrimQuick DS225 adhesive window moulding is made from white vinyl
No painting required or hardware required; just trim, peel, and stick
Each piece is 1/16-in thick x 2-1/4-in wide x 12-ft long
Use pvc window moulding to decoractively cover gaps between your window and wall
Easy to install, pre-taped with industry-best SIS adhesive and comes pre-scored for easy trimming
When installing, the trim must have as much adhesive on the window frame as the gap you are covering
Though our adhesive is water-resistant, vinyl surfaces must be free of dust, oil and moisture to create the strongest bond
Apply a final bead of caulking to achieve a permanent seal between the trim and drywall, the gap the trim is covering exceeds 1-in be sure to use a quality elastomeric sealant to hold trim to drywall.
Recommended for interior use only