Add some real warmth and privacy to your yard this year with the Slipfence horizontal fence system. This 91" aluminum channel kit (for an 8 ft high fence), combined with the Slipfence post kit (sold separately) provides a strong, long-lasting framework for your horizontal fencing project. Once the posts are set in concrete, these channels attach to the posts vertically with stainless screws (provided). Once the framework is installed, you slip in 5/4" deck boards (sold separately) into the channels and then secure the boards to the channels with wood screws (provided in your channel kit). The result in a warm and fully private, contemporary, horizontal wood fence that has the strength and endurance of an aluminum fence. The Slipfence allows you to easily replace the boards should they shrink or warp over time.
Two aluminum channels 91 in long to be fastened to SLIPFENCE aluminum post (sold separately) to create an 8 ft high fence
Must use 5/4 inch thick deck boards, actual board thickness is 1 inch
Just set the posts (sold separately), attach the channels with stainless screws included, slip in deck boards
Aluminum system was designed to last, wood can easily be removed or replaced at any time
Inside dimension 1.123 in x 1.125 in x 91 in long
8 ft high fence requires 17 pcs 5/4 In x 6 In stacked deck board
Channels are constructed of 100% aluminum, powder coated for use in any climate
Screws included are all stainless steel so will never rust, rot, or corrode