Slipfence Composite 7-ft H x 6 W Black Powder Coated Privacy Composite Fence Panel

Your forever fence has finally arrived with this NEW Slipfence Composite Horizontal fencing system. This panel is to be purchased with the Slipfence 3 in. x 10 ft. Aluminum post kit: SF2-PK310 or 4 in. x 10 ft. Aluminum post kit: SF2-PK410 or 3 in. x 12 ft. Aluminum Post Kit: SF2-PK312. Fasten the 2 side rails included in this kit to 2 Slipfence posts and screw the bottom rail to the side channels through the pre-punched channel holes. Then slip in 11 tongue and groove boards included in the kit, into the side channels, and once you have 11 boards loaded into the panel, add the middle Tongue and Groove Aluminum Rail (same as the bottom Rail) for added support before slipping in the final 2 top boards. Then cap the 7 ft. panel with the top Grooved Rail. The result is a beautiful, warm, natural-looking fence that will never rust, warp, discolor, crack, or rot. This fence system continues to look as great as the day it was installed for decades, and the only maintenance is a periodic wash with the hose. The boards are made from a composition of recycled wood and plastic fibers, and the aluminum is 100% recyclable for a complete carbon-neutral product that helps you, your property, and the environment. If you would like to change the color of your Slipfence over time, simply slip the old boards out and slip new ones in for a completely new look. The posts and framework are set once and stay for good. Build it Once, Build it Right, and it will stand the test of time. Slipfence.