Simpson Strong-Tie EPB 4-in x 4-in Hot-dipped galvanized Wood to concrete (cast in place) Base
Item #1944512 |
Model #EPB44PHDG
Added standoff adjustability to suit a variety of applications
Install in wet concrete
Provides the code-required 1-in standoff when properly installed, allows up to 2-1/2-in of standoff above concrete (if desired)
Not recommended for non top-supported installations (such as fences or unbraced carports)
Nominal post size: 4x4
Made with 12-gauge base, threaded rod support 3/4-in x 6-in (nut and washer are shipped assembled)
Hot-dip galvanization (HDG) offers extra corrosion resistance for exterior and treated-wood applications
Install with 3/4-in diameter anchor bolt and 0.162-in x 3-1/2-in nails or #10 x 1-1/2-in Strong-Drive SD screws
General | |||
|---|---|---|---|
Finish | Hot-dipped galvanized | Material | Steel |
Manufacturer Color/Finish | Hot-Dip Galvanized | Package Quantity | 1 |
Series Name | EPB | Materials Connected | Wood to concrete (cast in place) |
Type | Base | Nails Required | 16D |
Dimensions | |||
|---|---|---|---|
Actual Depth (Inches) | 3.25 | Actual Width (Inches) | 3.763 |
Actual Weight (lbs.) | 1.7 | Common Measurement (T x W) | 4-in x 4-in |
Features | |||
|---|---|---|---|
Adjustable | No | Screws Included | No |
Gauge | 12 | Stainable/Paintable | No |
Certifications | |||
|---|---|---|---|
CA Residents: Prop 65 Warning(s) | No | ||
Warranty | |||
|---|---|---|---|
Warranty | None | ||
Miscellaneous | |||
|---|---|---|---|
UNSPSC | 30102900 | ||
Check out the Best Selling Base & Cap Hardware on Lowes.com
Ratings may include incentivized customer reviews.
Good
Good product but the mounting bolt could be a bit longer.
Verified Purchaser
Crazy expensive adjustable bracket
The bracket in the block did not adjust. So I paid way too much for this adjustable bracket, and you had no price for the block without the bracket. So I paid for a block that supposedly had the non adjustable bracket and the crazy expensive bracket too! There is a reason I shop last at Lowe’s!
Verified Purchaser
4x4 tir
Worked well with my project
Verified Purchaser
Don’t know
It looks sturdy enough for the job I am doing.
Verified Purchaser
Nut is 3/4-10 if you need an extra one.
I'm not using this for what is was designed and I needed several more nuts; which were in the little drawers of special nuts and bolts "grade 8" in the hardware department: 3/4-10. They are much tighter than the original.
13 Questions
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
Hi Ron not at Lowes, this is Bekah from Simpson Strong-Tie. We apologize for the inconvenience you encountered; please contact Lowe's Customer Se...