Steel Mending & Nail Plates

Simpson Strong-Tie   3-in x 1-1/2-in 14 -Gauge Galvanized Nail plates

The NS is designed to prevent nails from piercing and damaging water, gas and electrical lines and pipes. To protect supply lines, the nail stopper is installed over each point where utilities pass through framing members. The NS meets all building code requirements to provide protection against physical damage to utility lines.

Simpson Strong-Tie   6-in x 3-in 20 -Gauge Galvanized Mending plates

Simpson Strong-Tie straps and plates join and reinforce joints with simple, versatile solutions for a wide range of connections. Available in many lengths, widths and thicknesses, straps can be used on the wide or narrow face of lumber for light repairs or heavy-duty projects. Many straps are designed to be used back-to-back on a piece of lumber without fastener interference.

Simpson Strong-Tie   4-in x 2-in 20 -Gauge Galvanized Mending plates

Simpson Strong-Tie straps and plates join and reinforce joints with simple, versatile solutions for a wide range of connections. Available in many lengths, widths and thicknesses, straps can be used on the wide or narrow face of lumber for light repairs or heavy-duty projects. Many straps are designed to be used back-to-back on a piece of lumber without fastener interference.

Simpson Strong-Tie   6-in x 1-1/2-in 14 -Gauge Galvanized Nail plates

The NS is designed to prevent nails from piercing and damaging water, gas and electrical lines and pipes. To protect supply lines, the nail stopper is installed over each point where utilities pass through framing members. The NS meets all building code requirements to provide protection against physical damage to utility lines.

Simpson Strong-Tie   5-in x 16-1/4-in 16 -Gauge ZMAX Nail plates

Nail stoppers help prevent nails from piercing pipes and electrical lines. Install over utilities that pass through framing members. PSPNZ protecting shield plate nail stoppers meet IRC, IBC and the International Plumbing Code. PSPN516Z meets the code plumbing protection requirements as well as having additional fasteners if the designer chooses to use it as a track splice strap.

Simpson Strong-Tie   3-in x 3-in 3 -Gauge Hot-dipped galvanized Bearing plates

Bearing plates give greater bearing surface than standard cut washers. They are designed to help strengthen and distribute the load at these critical connections. Bearing plates are typically used on foundation anchor bolts in place of cut washers.

Simpson Strong-Tie   2-in x 2-in Bearing plates

Bearing plates give greater bearing surface than standard cut washers. They are designed to help strengthen and distribute the load at these critical connections. Bearing plates are typically used on foundation anchor bolts in place of cut washers.

Simpson Strong-Tie   2-1/2-in x 2-1/2-in Bearing plates

Bearing plates give greater bearing surface than standard cut washers. They are designed to help strengthen and distribute the load at these critical connections. Bearing plates are typically used on foundation anchor bolts in place of cut washers.

Simpson Strong-Tie   5-in x 8-1/16-in 16 -Gauge ZMAX Nail plates

Nail stoppers help prevent nails from piercing pipes and electrical lines. Install over utilities that pass through framing members. PSPNZ protecting shield plate nail stoppers meet IRC, IBC and the International Plumbing Code.

Sigma ProConnex   2-1/2-in x 1-1/2-in Nail plates 100 -Pack

Sigma's Safety Nail Plates are used to protect cable insulation from nail punctures in wooden structures. These nail plates are of zinc-plated steel construction.

Simpson Strong-Tie   3-in x 3-in 3 -Gauge Bearing plates

Bearing plates give greater bearing surface than standard cut washers. They are designed to help strengthen and distribute the load at these critical connections. Bearing plates are typically used on foundation anchor bolts in place of cut washers.

Hillman   3-in x 3-in Hot-dipped galvanized Bearing plates

Galvanized Bearing Plates are essentially flat washers with a greater surface area. Similar to flat washers, bearing plates should be used with nuts and bolts of a similar size and finish in order to ensure integrity of connections. Bearing plates are commonly used in foundational applications with anchor bolts. They can be used in place of split washers.

Simpson Strong-Tie   Outdoor Accents Avant APVGP 19-3/4-in x 34-1/2-in 12 -Gauge Powder-coated Gable Plate

The Simpson Strong-Tie Outdoor Accents line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The Avant Collection features straighter edges for a more contemporary design. These gable plates provide reinforcement for a connection from a wood beam to three angled wood braces. Three sizes are available: 6:12 pitch, 8:12 pitch and 12:12 pitch.

Simpson Strong-Tie   3-in x 3-in 3 -Gauge Bearing plates

Bearing plates give greater bearing surface than standard cut washers. They are designed to help strengthen and distribute the load at these critical connections. Bearing plates are typically used on foundation anchor bolts in place of cut washers.

Sigma ProConnex   2-1/2-in x 1-1/2-in Nail plates

Sigma's Safety Nail Plates are used to protect cable insulation from nail punctures in wooden structures. These nail plates are of zinc-plated steel construction.

Hillman   2-in x 2-in Hot-dipped galvanized Bearing plates

Galvanized Bearing Plates are essentially flat washers with a greater surface area. Similar to flat washers, bearing plates should be used with nuts and bolts of a similar size and finish in order to ensure integrity of connections. Bearing plates are commonly used in foundational applications with anchor bolts. They can be used in place of split washers.

Simpson Strong-Tie   4-in x 1-in 20 -Gauge Galvanized Mending plates

Simpson Strong-Tie straps and plates join and reinforce joints with simple, versatile solutions for a wide range of connections. Available in many lengths, widths and thicknesses, straps can be used on the wide or narrow face of lumber for light repairs or heavy-duty projects. Many straps are designed to be used back-to-back on a piece of lumber without fastener interference.

Hubbell   PUZZLE-PLATE 2-5/8-in x 1-1/2-in Galvanized Nail plates

RACO PUZZLE-PLATE® is designed with an interlocking component that does not allow nail or screw penetration through gaps or holes. The 1/2 inch spike is used to drive into the wood stud. Installation is easy, just position and hammer down the spurs.