SharkBite 1/2-in Push-to-connect x 3/8-in OD Compression Brass Quarter turn Stop Angle valve
Item #1642698 |
Model #24731LFZ
Fastest way to connect stop valve to PEX, copper, CPVC stub outs
Requires no special tools to install on hot or cold stub outs
Works on wet lines, rotatable after installation, and removable
Push-to-connect fittings are ideal for installation in tight spaces
Rated to 160 degrees Fahrenheit and 125 PSI
Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
Chrome-plated exterior body
Low-lead DZR corrosion-resistant brass body
Code approved, IAPMO listed, for details see specifications
General | |||
|---|---|---|---|
Type | Angle valve | Inlet Thread Type | Push-to-connect |
Material | Brass | Outlet Thread Type | OD Compression |
Package Quantity | 1 | Turn | Quarter turn |
Dimensions | |||
|---|---|---|---|
Inlet Diameter | 1/2-in | Outlet Diameter | 3/8-in |
Inlet Size in Inches | 1/2-in | ||
Features | |||
|---|---|---|---|
Maximum Pressure | 125 PSI | ||
Certifications | |||
|---|---|---|---|
CA Residents: Prop 65 Warning(s) | Complies with Federal Lead Guidelines | Yes | |
Warranty | |||
|---|---|---|---|
Warranty | 2-year limited | ||
Miscellaneous | |||
|---|---|---|---|
UNSPSC | 40141600 | ||
Check out the Best Selling Shut-Off Valves on Lowes.com
Ratings may include incentivized customer reviews.
New school meets old school
I've used many different Sharkbite products, as I'm sure any maintenance person or DIY person has, and although they're a bit more expensive than the other sweat or glue options, they're typically much quicker to use, and pretty much trouble free. I've heard people say that they're not a permanent solution, but I've seen them installed in an industry setting that saved a ton of downtime that are still working perfectly, over 8 years later. And that's in the 2 to 3 inch size. I love the old-schoo...
Cheap and good!
This was just a little over a buck so you can’t beat that! Works great! I got them for my bathroom vanity that didn’t have shut off valves. I’m in a tight budget and these fit the bill. I just used a piece of wire to hang the key in there so I can have quick access to it for turn off! Clean your pipes good and you won’t have any leaks! I recommend!
Verified Purchaser
Gets the job done
These work very well for the toilet. I stocked up because you never know when you will need them. Make sure they are seated properly (push it down far)
Verified Purchaser
Keyed shutoff
I liked the price and ease of installation but the key should have a wire or chain to keep it close for shutting down the valve it security isn't necessary
Verified Purchaser
No Leaks
Installed in a public bathroom, where I did not want people turning the knob.
Verified Purchaser
0 Questions
Be the first to ask a question