Saint-Gobain ADFORS Frame Replacement Kit 1/2-in x 4-ft Mill Aluminum Replacement screen kit

Corner pieces dont fit

I still have my old frame and cut the pieces the same length. The corner pieces in the kit do not fit the frame despite coming in the same kit. How does that happen? Waste of money.

The aluminum is very thin and prone to warping when installing screen

Keeping pests out

Looks pretty easy to install for the usual mobile home size windows.

Horrible quality and insane packaging!

So, not only do they package the individual cut-to-size pieces with the spline already in them (so you first have to pull them out, which stretches and rips them), but the material is so cheaply and terribly made that it is mostly unusable. Just the act of pulling out the spline is enough to bend the frame. A slight breeze will bend this cheap frame. Do NOT buy these kits! If they had frames that were even halfway decent, it would be fine, but these frames will bend and twist just by looking at ...

The spline is pre installed

The pre-installed spline is horrible. Even if you are as careful as possible the spline still tears and in the process the frame gets nicked. Even with two people carefully trying to remove it, it still stretches and tears. Returning this item. If only I could be compensated for wasted time. Very disappointed.

cheaply made product

I purchased these kits to build replacement window screens for my house. The aluminum frames used in these kits are a very thin gauge aluminum which will bend and flex when you spline screen into the frame making them virtually useless. Don’t waste your money on these.

Should be removed from Lowes inventory

This is a terrible product. I bought 4 sets, attempted one, then returned the rest. I'd like a refund on the one attempt. I read reviews wondering if I was doing something wrong after finding the spline would not come out. I was very gentle putting it together as many other mentioned how fragile they are. No good. Sides still bowed and warped. I went to attempt to put it in the window anyway, which is when I noticed the plastic end-caps showing signs of strain. A tiny bit of force putting into p...

Do Yourself A Favor and BUY SPLINE!!

The screen kit comes with 48" precut metal frame pieces that have spline pre-cut and inserted into the screen channels. The consumer must pull the spline out in order to fit the screen material in. The spline in the kit that I purchased was so old that it was brittle and melted into the channels. It was a small nightmare to dig it out of the channel with a ice pick and took considerable amount of time to dig it all out of all the pieces. Otherwise the kit worked well. Just do yourselves a favor...