The Attero Tech unBT2A is single gang Decora style in-wall Bluetooth audio interface aimed at adding Bluetooth audio connectivity to installed audio systems. The unBT2A can be used in any venue where there's a need to stream Bluetooth audio from a smart phone, laptop, tablet or other Bluetooth audio equipped smart device to the sound system. The unBT2A features a simple and consistent pairing process to eliminate the frustrating experience users often have with consumer grade Bluetooth interfaces.Through the unBT2A EXP expander unit, the unBT2A outputs balanced mono or stereo analog audio on 3-pin depluggable connectors for easy connection to commercial audio equipment. The unBT2A USB port is used for initial product setup at installation, and the unBT2A EXP has an RS-232 port for 3rd party control. Features. Single gang Decora form factor for easy installation in space constrained applications. Simple pairing one button pairing/connect process for standalone operation with LED indication of connection status. Simple serial control protocol for integration with 3rd party control system via RS-232 ( Remote connection management and status monitoring. Defeatable pairing button for restricted use applications with 3rd party control systems. Balanced mono/stereo analog outputs for interfacing to both commercial and consumer audio equipment. USB bus-powered connection for simple setup prior to installation and firmware update. Customizable Bluetooth friendly name for applications with co-located unBT2As. Compatible with most smartphones, Apple iPads, and Android tablets Specifications. Bluetooth Profile: A2DP - Stereo audio is streamed from a Bluetooth. Bluetooth Range: 10 meters ( 30ft) minimum. Depluggable Output Type: Balanced 3-pin line level, -10dBV/. Dynamic Range: >85dB. Maximum Output Level ( Balanced depluggable): +20dBu in +4dBu setting, +6dBu in -10dBV setting. System THD: Less than.1 Percent. RS-232: Full RS-232 control ( standard RS-232 levels) of pairing an
The Attero Tech unBT2A is single gang Decora style in-wall Bluetooth audio interface aimed at adding Bluetooth audio connectivity to installed audio systems. The unBT2A can be used in any venue where there's a need to stream Bluetooth audio from a smart
Single gang Decora form factor for easy installation in space constrained applications
