Ready to install, the Winged Jet Assembly comes preassembled with the sprayer, riser, barbed inlet, and stake. Set up is simple—put stake in the ground, set the riser height, then connect 1/4 inch tubing to the 1/4 inch inlet. Fan spray emits water in a full-circle pattern at up to 31.4 GPH and radius of up to 5.4 ft. (at 15-50 PSI). The winged jet, designed like the winged nut, has thumb grips to remove easily for cleaning. Provides low volume overhead irrigation for gardens, flower beds, ground cover, and hillsides. Assembly is made of polyethylene treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. With a non-pressure compensating emitter, expect varying water flows based on length of tubing or elevation, with higher flows closer to the water source. The Winged Jet Assembly comes preassembled with a jet sprayer, adjustable riser with barbed inlet, and stake, and is ideal for low volume overhead irrigation. Raindrip offers an emitter for every watering need.
Jet sprayer, riser with barbed inlet, and stake come preassembled
Fan spray releases water in a full-circle pattern
Discharges up to 31.4 GPH with radius up to 5.4 ft
Releases low volume overhead irrigation with a fan spray in a full-circle pattern
Ideal for watering groundcover, flower beds, planting beds, and vegetable gardens
Built-in 1/4 inch barbed inlet connects to 1/4 inch supply tubing with 0.170 inch Internal diameter (ID)
Jet sprayer, adjustable riser with 1/4 inch barbed inlet, and 13 inch stake come preassembled for a quicker install
Comes with one Winged Jet Assembly which includes a jet sprayer, adjustable riser with barbed adapter, and 13 inch stake