Raindrip 1/4-In x 50-Feet Drip Irrigation Distribution Tubing

Branch off the main supply line to create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system

Tubing outside diameter (OD) is 0.250-in internal diameter (ID) is 0.170-in, connect to main supply line with 1/4 in micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant

Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

To use as a feeder line, connect to the main line with a micro fitting, to use as a main line, connect 1/4-in lines together with micro fittings

Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content; the middle layer is composed of recycled content

Tubing coil comes shrinkwrapped for convenience; easy to access as needed Works with Raindrip products and other products with compatible connection type; treated with UV inhibitors to prevent fading and cracking

Periodically check for leaks or damage; once or twice a year, remove end closures and flush each circuit until the water runs clear; in cold climate areas, winterize by completely draining the system to prevent lines from damage or splitting

Comes with one 50-ft coil of 1/4-in poly supply tubing Use with barbed micro fitting to connect to main supply line