The D SERIES-RLC10 is a rotary remote level control that provides user adjustment at single or multiple locations. Optical encoder technology allows continuous knob rotation with a comfortable adjustment rate and long-term trouble-free and noise-free operation. These controls directly connect to any RDL VCA and OEM equipment with 0 to 10 Vdc ramp inputs. A single -RLC10 may be connected to a ramp-controlled VCA using a single-pair shielded audio cable or unshielded cable. A rear-panel switch configures the control as the MASTER. The MASTER mode causes this control to drive the 0 to 10 Vdc ramp output and to monitor its pulse terminals in case any other -RLC10 controls are connected. As many as nine additional -RLC10 controls may be wired in parallel with the MASTER control using UTP cable ( CAT5, CAT6 or equivalent). The rear-panel MODE switch on each additional remote control is set to SLAVE mode. Features Rotary Optical Encoder Remote Level Control Single or Multiple Control Locations Up To Ten Remote Control Locations Integral 0 to 10 VDC Ramp Generator Visual Level Display of Operating Level Display is Bright During Adjustment Display Dims After Adjustment Powers Up to Last Level Used Compatible with All RDL VCA Modules Specifications Ramp: 0 to 10 Vdc ( Slave mode input, Master mode output) Pulse outputs ( 2): Open-Collector 20 mA ( UP, DOWN) Pulse duration: 500 uS ( min.) to 4 mS ( max.) Pulse interval: 500 uS ( min., between consecutive pulses) Level Control: Optical rotary encoder Weight: 0.42 lbs
The D SERIES-RLC10 is a rotary remote level control that provides user adjustment at single or multiple locations. Optical encoder technology allows continuous knob rotation with a comfortable adjustment rate and long-term trouble-free and noise-free
Made from Top Quality material