PC-Clear is a completely clear liquid epoxy. PC-Clear is formulated to remain clear during and after its curing time. PC-Clear is very durable and flexible making it unlike many liquid epoxies. If disguising a repair or the absence of color is needed, PC-Clear is your product of choice. PC-Clear demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Note: PC-Clear will not bond to wax paper, Teflon, polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Test a small area when in doubt.
Kit includes clear epoxy adhesive liquid, dispensing gun, and mixing nozzles to bond wood, metal, glass, ceramic, concrete, and fabric
Fast curing liquid epoxy with exceptional clarity and gloss; indoor and outdoor repairs
Bonds and fills wood, metal, glass, ceramic, concrete, and fabric; tough, high strength adhesive
Work time 4 to 8 minutes; apply thick or thin; tints easily; can be sanded
Continuous service temperature range from -20 to +200 degrees F
Provides work time of approximately 4 minutes, cure time for function of 1 hour, and full cure time of 24 hours
Forms tough bond for durability
PC-Clear will get warm when it cures, depending largely on the amount of resin and hardener mixed
Color of dispensing gun may vary
