Lenco Marine Electric Edge Mount Trim Tab Kit Without Switch- 12-in by 12-in

Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a 1/2-in (1.3 cm) lower mounting height on 9-in (22.9 cm) long blades and 3-in (7.6 cm) lower mounting height on 12-in (30.5 cm) long blades. All edges are turned up for added strength and style. Boat lengths 14-ft (4.3 m) to 36-ft (11 m). Blades are constructed of 12 gauge (2.7 mm) laser cut 304 stainless steel with 1-in (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge, and 1/8-in (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Kit includes: (2) 12-gauge stainless steel standard finish blades, (2) 15054-001 actuators with 6-ft (1.8 m) leads and Deutsch connectors, (2) 30133-103 actuator extension wiring harnesses - 20-ft (6.1 m) length, (2) 15085-001 upper mounting brackets with gland seal, (2) 50014-001 lower mounting brackets and Lenco owner's/installation manual. Switch kits sold separately.