Clearing clogged sink, tub and laundry drains is easier with the Power-Vee drain cleaning machine with automatic feed. We have miniaturized our big machine power cable feed and put it on the Power-Vee to give you feeding speed and convenience you haven’t seen before in a hand-held power drain cleaner. It’s a real labor-saver in tight or awkward places. It’s like having an extra hand. To feed the cable just start the Power-Vee and squeeze the feed lever; to retract it, reverse the motor and squeeze the lever. The PowerVee feed handles 1/4 inch, 5/16 inch and 3/8 inch cables. No cables, disassembly, or additional parts required. Quick change cable cartridges make it easy to switch to different diameter drain cables. You just loosen three screws, pull the front of the drum off and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The machine holds 50 feet of 1/4 inch, 5/16 inch or 35 feet of 3/8 inch Flexicore® cables. The Power-Vee also comes with the new Band-it™ splash guard to minimize excess water spray from the spinning drum. Our Dyna-thrust™ bearing system helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the life of the tool. Also adding to the Power-Vee’s durability is the heavy-gauge stamped aluminum drum. Of course, the cables are Flexicore® – with an integral wire rope center. Nobody makes cables like General. This package contains the Power-Vee with a 1/4 in. x 25 ft. cable with an attached down head.
For sinks, tubs and laundry drains
Power cable feed drives and retracts cables at up to 16 feet per minute
Quick-change cartridge makes switching cables clean and easy
The Flexicore® wire rope center cables have unequaled strength and flexibility
Powered by a variable speed 3.2 amp double insulated, reversible, UL approved motor
Ideal for clearing 1-1/4 inch to 2 inch drain lines with the 1/4 inch diameter cable
Auto feed mechanism has a unique Dyna-thrust™ bearing system for longer tool life
Band-it™ splash guard minimizes excess water spray from the spinning drum
Made in the USA