Frame It All 7.5-in x 7.5-in x 5.5-in Plastic Raised Garden Bed 4-Way Joint

Create your own raised garden bed designs using Frame It All raised garden bed brackets and boards (sold separately). Use the 1 in. 4-way bracing bracket where 3 or 4 one-inch boards intersect, or to prevent frost push out in long spans of boards. The 4-way bracket comes in 2 pieces that can be used either together (to create a hub) or separately at either end of a board to bridge a span where two boards intersect. An example of where you use the 4-way as a hub would be if you are creating an 8 Ft. x 8 Ft. raised bed with two Frame It All insulating boards on each side of your square garden. If you would like to create 4 separated 4 Ft. x 4 Ft. spaces within your larger garden (and fortify it against frost push out) you would use the 4-way bracing bracket in the center (as a hub or spoke), from which your four interior boards would radiate. in the same example, you would use one half of the 4-way bracket to create a 3-way connection at the opposite end of the boards where they join at the intersection of two exterior boards. When creating a long garden (8 Ft. or longer), use one half of a 4-way bracket on either end of a bracing board to span across your raised garden bed where two boards butt together. This is only necessary when you stack levels and should be used every second level to prevent frost push out. The 4-way bracket will keep your garden perfectly square regardless of what mother nature throws at it.