When you are searching for a solution to extensive audio problems, the ATI ADA412 can handle any issue you throw its way with strength and reliability. The ADA412 is RF protected and eliminates noise from lossy splitters while driving long lines. Features. Twelve balanced outputs divided among four independent channels. Individual wide range audio output level controls. Separate input and clipping LED's for each 1x3 group. Active balanced outputs with automatic ground sensing for connecting to balanced or unbalanced loads Specifications. Number of Inputs: 4. Input Type: Active balanced with RFI filtering. Input Audio Level: Adjustable - 10 dBu to +4 dBu. Max Input Level: + 26 dBu. Input Impedance: >10K Ohms ( balanced). Input Ccmr: 60 dB at 60 Hz. Gain: 20 dB Max. Nominal Level: + 4 dBu input/output. Peak Levels: + 26 dBu input and + 26 dBu output. Number Of Outputs: 12. Output Level: + 4 dBu. Max Output Level: + 26 dBu. Output Impedance: < 40 Ohms. Output Gain Adjust: + 8 dB to - 10 dB for each output. Output Protection: Short circuit protection on each output. Frequency Response: +/- 0.1 20 Hz to 20 kHz. Thd Distortion At +4 Db: 0.01 Percent 20 Hz to 20 kHz. Thd Distortion At Maximum Level: 0.1 Percent 20 Hz to 20 kHz. Imd Distortion Smpte: 0.05 Percent. Signal To Noise Ratio: > 90 dB 20 Hz to 22 kHz. Inter Channel Level Difference: > 0.5db 20 Hz to 20KHz. Inter Channel Phase Difference: < 0.5 degrees 20 Hz to 20 kHz. Inter Channel Crosstalk: > 90 db 20Hz to 20KHz. Slew Rate: 13 volts per microsecond. Io Connectors: XLR. Electro Magnetic Interference ( Emi): Unit is intrinsically EMI proof. Power: Auto-sensing 110-240 VAC +/- 10 Percent 47 to 63 Hz, 20 VA. Weight: 18 lbs
When you are searching for a solution to extensive audio problems, the ATI ADA412 can handle any issue you throw its way with strength and reliability. The ADA412 is RF protected and eliminates noise from lossy splitters while driving long lines. Features
Twelve balanced outputs divided among four independent channels
