Crescent Medium Aluminum 12-in 96 -Tooth Carbide Circular saw blade Individual

Nice clean cuts

I know it says ALUMINUM. It is not made of aluminum and that is not all it was made to cut. It cuts Brass, copper, plastic and fiberglass also. I cut mostly plastic and fiberglass. The cuts are better than the very fine wood saw blades I have used. In fact I tested joining a 90 degree ABC cut by priming and gluing. It made a very clean and strong joint. I will try to illustrate some cut differences with pictures. I have many Crescent tools and find their quality to be in the professional catego...

Super clean cuts, Zero vibration, very impressed

First, the design and engineering IMO is top notch. 96 sharp carbide teeth, laser cut vibration slots that even go one step more by using silicone over the vibration slots, and the blade is coated to run smooth through the cut. In my case cutting an aluminum tile trim for a bathroom remodel that requires very clean angles, this blade exceeds even my expectations. I have only used this for aluminum, but PVC, copper and brass shouldn't be any issue. No issues with burrs or material that melted. Ze...

Quality blade

I have given this saw blade a very close inspection and find it high quality. The teeth are very sharp and appear to be very well attached. There are several places around the blade with 2 holes about 2 inches apart with a laser cut squiggly line connecting the 2 holes. These are to help with cooling and also to help prevent harmonic vibrations. I haven't used the blade yet, but will do so in the near future. I have a project this blade will make so much easier.

Perfectly balanced, sharp cut and noise reduction

I am a finish carpenter by trade for 20 years now and i can honestly say that we use aluminum cutting blades because it gives a finer cut and lasts longer. I have always loved Crescent tools and when i received this blade i knew it would be a high performance tool. That is very true the blade is perfectly balanced with noise reduction and the cut is very sharp. This will be the beginning of Crescent blades for my saws.

Awesome saw blade for your table saw!

Was looking for a 12" Saw Blade to rip down boards and cut 2x4's and this blade fit the bill and has worked well after over 100 cuts. It is quiet and rips well - leaving the edges smooth without too much chaff. Highly recommended.

Cuts well.

Excellent blade. Performed a test cut of a piece of aluminum. Cut edge came out smooth and clean. No screaming/screeching noise while cutting. I would recommend using this blade for cutting soft metals.

Sharp long lasting circular saw blade

Great long lasting saw blade. I have used it to cut plastic, copper and aluminum and it has done really well. It still cuts as smooth as the first cut. Came packaged well.

High Quality 12 inch Aluminum Cutting Blade

Nice aluminum cutting blade for my Dewalt miter saw. Cuts through aluminum balusters that I used for my decking with ease. Stayed sharp through the whole project.

Great Quality! Very Heavy Duty!

Great Quality Product! Very Heavy Duty! Packaged very well. I am a woodworker but sometimes I use aluminum or galvanized sheet metal. Very smooth.