The CAMO Wedge clip can be installed on any board, at any angle, in any environment. The Wedge clip is approved for use for any grooved composite, PVC, and hardwood deck boards. Installation is flexible and easy. Able to be screwed in 90-degree, diagonal, or herringbone patterns, simply set the clip in the groove of the board until you're ready to fasten. No partial installation required. The 316 stainless steel gusset and 316 stainless steel screw offer superior corrosion resistance and holding power, while the nylon plastic spacer body creates an automatic 3/16 in spacing between boards, allowing for proper airflow and drainage. When you're ready to fasten, speed up the job with the included NEVER-MISS Guide that helps you easily connect the T-15 bit to the exposed screw head. The T-15 Star Drive on the screw reduces cam-outs, but be sure to use a drill-not an impact driver-during install. Install deck clips standing up with the CAMO DRIVE system and save your back and knees.
FREE TOOL: Buy 2 pails of 900ct Wedge Clips, get a free ClipDrive tool
UNIVERSAL CLIPS: Engineered and tested to fit most grooved composite, capped composite, PVC, and hardwood deck boards
STAND-UP INSTALLATION: Install CAMO Edge or Wedge Deck Clips while standing up, saving your back
ANY BOARD, ANY ANGLE: install on grooved composite, PVC, and hardwood in 90-degree, diagonal, or herringbone patterns
EASY INSTALLATION: pre-assembled clips require no partial installation - clips stay in place in the groove until ready to fasten
OPTIMAL CORROSION RESISTANCE: 316 stainless steel offers the best corrosion resistance for coastal applications or projects in highly corrosive environments
1-pass fasteners - clip prongs fit into the boards's groove and hold the clip until you're ready to fasten
Clip body creates 3/16 in (4.7 mm) spacing while the gusset holds boards down
Tool includes a T20 driver, T15 driver, and a guide for Edge fastening (orange), Face fastening (black), and Universal Deck Clips (yellow)