This siding mounting block gives you a clean, professional way to add outdoor lighting to vinyl siding. Molded from solid, sturdy plastic with a textured, paintable off-white finish, it can be painted to match your siding or left in its natural color. The block measures 6.53 inches wide by 10.23 inches long and is designed to snugly fit 4 inch height siding with a double 1/2 inch lap. A built-in electrical box protects wiring connections, with a drainage hole at the bottom and a top that should be sealed to keep water out. The kit works on T-111, HardiePlank lap siding, and other flat surfaces, and includes the mounting block, a cable connector, and four mounting screws for a complete setup.
Paintable Off-White Surface: This mounting block is molded from solid, sturdy plastic with a textured, paintable finish that can be left in its natural off-white tone or painted
Compact 6.53 x 10.23-Inch Footprint: The mounting block measures 6.53 inches wide by 10.23 inches long and is sized to snugly fit 4 inch height siding with a double 1/2 inch lap
Sealed Electrical Box with Drainage Hole: The built-in electrical box includes a bottom drainage hole, and the top of the box should be sealed around the wiring to keep water
Four-Step Mounting Process: Drill a hole through the siding lap for the wire, remove the knockout from the electrical box, insert the cable connector, thread the wire through
Flat and Lap Siding Surfaces: This mounting kit works on T-111 siding, HardiePlank lap siding, and other flat surfaces, making it easy to add a new outdoor light fixture
Complete Hardware Set: Each kit includes the mounting block with built-in electrical box, a cable connector, and four mounting screws so you have everything needed to complete