GIVIMO 750-W Electric 3-Roller Pipe Bending Machine 1-HP 220-V 60-Hz 3-Phase Roll Bender 180-deg Bend Angle with Reversible ft Switch Horizontal and Vertical Operation for Tube and Square Stock

Dual-Axis Roller Drive: Vertically adjustable upper roller changes rolled diameter without tooling swaps, so one machine handles a wide range of arc radii on tube

Reversible Foot Switch: Forward and reverse foot pedal frees both hands to feed and steady stock, which improves arc consistency on long tube and rebar runs

180-deg Bend Capacity: 750-W motor and three-roller geometry roll round tube, square tube and flat strip up to 5-mm wall thickness through a full 180-deg arc

Handrail And Frame Shops: Shapes guardrails, gate frames, rolled cages, rebar rings and structural arches for steel fabrication, automotive repair and construction sites

Q235 Steel Frame Build: Q235 frame with 45 steel rollers and 40Cr drive parts resists deflection under load, supporting smooth consistent feed across heavy work cycles

Specification: Power: 1 HP / 750 W; Voltage: 220 V 60 Hz 3-Phase; Max Bend Angle: 180-deg; Wall Thickness Capacity: up to 5-mm; Tube Range: Square 16-mm x 16-mm to 40-mm x 40-mm; Square Steel: 25-mm x 25-mm; Flat Strip: 40-mm x 10-mm x 10-mm; Machine Size: 25.8-in x 24.4-in x 53.9-in / 655-mm x 620-mm x 1370-mm; Net Weight: 496 lb / 225 kg; Frame: Q235 / 45 Steel / 40Cr