Buyers Products SaltDogg 2.5-5.5 Cubic Yard Hydraulic Conveyor Chain Spreader gives contractors and municipalities a heavy duty, durable spreader powered by 10-1/2 HP Briggs and Stratton Intek Industrial/Commercial gas engine, with in-cab electric start throttle control. The spreader combines the power of a gas engine with modern spreader conveniences. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix. The hoppers are designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight) chassis; depending on size of spreader. The highly corrosion-resistant welded 12GA(.105) 304 stainless steel hopper comes equipped with two top screens with 1/4 in bars. The 14-1/2 in. wide, high-flow, steel pintle chain conveyor has 1/4 in. crossbars and a stainless steel floor. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on startup. A SaltDogg Spreader is built to last. A stainless steel inverted V reduces stress on the drive line to improve material flow. An adjustable feedgate with lock pin offers additional material flow control. The spreader comes equipped with a 12V electric clutch and in-cab, three position momentary switch and throttle. An 18 in. poly spinner casts material 2 ft to 30 ft. Adustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing. Spreader is shown with optional light bar (8891144) and pre-wet system (LS1) which are sold separately.
Designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight)
High quality, welded 304 stainless steel construction for optimum corrosion resistance
Powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with an included battery for electric start
Spreads bulk salt, bulk sand, or a 50/50 salt/sand mix.
In-cab controls with independent variable speeds for the conveyor and spinner.
18 in poly spinner broadcasts up to 30 ft.
Versatile 14-1/2 in chain conveyor drive with 1/4 in crossbars, Two chute baffles allow you to adjust the spread pattern to your use.
Stainless steel inverted V reduces stress on the drive line and improves flow, Two top screens with 1/4 in bars included.
Spreader is shown with optional light bar (8891144) , and pre-wet system (LS1) which are sold separately.
