This is a side mounted, top hung wardrobe roller assembly with a tandem 7/8 in. convex nylon wheel for the front sliding wardrobe door. The stamped steel bracket assembly is adjustable and has an 1/4 in. offset. It is fitted onto the wardrobe front door and fits 3/4 in. to 1-3/8 in. thick doors. Used by Acme and Stanley door systems, as well as a variety of other wardrobe door manufacturers. For the back wardrobe door roller assembly use Prime-Line part N 6503. This mirror door roller assembly mounts on the bottoms of sliding mirrored closet doors, it is adjustable once installed, and it is used by a variety of closet door manufacturers.
MIRROR DOOR ROLLER ASSEMBLY – The Prime-Line N 6870 Mirror Door Roller Assembly is most commonly used on wood framed sliding mirror doors
CONSTRUCTION – Adjustable steel housing with non-ball bearing plastic roller which provides for a smooth, long-lasting, quiet roll and features a 1-1/2 inch center grooved plastic roller narrow concave (grooved) edge
INSTALLATION – It mounts on the bottoms of sliding mirrored closet doors, it is adjustable once installed, and it is used by many closet door manufacturers (tabs will sit flush to door frame and the back mounting lip helps to secure the roller assembly to the door
DIMENSIONS – The housing has 2-1/2 inch mounting hole centers, its body measures 1-11/16 inch wide and only 7/16 inch deep
NOTE - Please review the line art for dimensions and compare with your needs before purchasing (Not Universal)
