Tools and Materials
Steps on How to Install a Sliding Window
Here are the steps to prepare for the sliding installation process.
Before beginning the installation
process, measure the height, width and depth of the product. Using a measuring tape, measure the wall opening where the window will be
installed.
Double-check before you remove the old window. Then remove the old window and clean the opening. On one end of the window track, gently slide a flat
pry bar between the window frame and track. As you gently twist the pry bar, the window track should pop out easily and then you can
pull the track out fully.
Always wear gloves and safety glasses to protect yourself from any splinters and shards that may occur during the removal process.
Check if the opening is prepared for the window installation . Double check the measurements of your space. The measurements should be accurate to make sure that the new sliding window installation fits perfectly within the opening.
Inspect the empty window opening to check if there are any damages such
as cracks. Make sure to fix these problems so there are no complications during
installing the new sliding windows.
Before installing the window permanently, place the window in the opening frame to check if the window fits correctly. The sliding window's level must be checked and adjusted before fastening the installation. You have to check if the window is operating decently before you put any screws in. Start applying a bead of caulk with a caulk gun around the frame’s perimeter. This will create an air-tight concealment, which will protect against elements such as air, water and insects from getting inside the house.
Place the window carefully
into the opening by pressing it firmly inside the caulk. Secure the window
carefully with screws. With
the help of a level, ensure the window is perfectly positioned and make any
necessary adjustments to avoid future operational difficulties.
Insulate the gaps between the window frame and the
rough opening. Use self-adhesive
foam
insulation to
air-tight seal.
Foam can be used to fill larger gaps in the windows as well.
Do not
use too much foam, as it can lead to a deformation of the window frame.
The final step is to install or
reattach a new trim and molding around the interior of the window to give it a finished look. Use nails to secure the trim in a fixed
position. If you want to match the trim and the décor of your house you can
also get it painted or stained according to your choice. And lastly, clean the
window glass and frame to remove dirt or fingerprints.
Once the installation process is done, check for check for any openings or vulnerabilities where water or air might seep through. Regular maintenance is necessary to extend the lifespan of your windows and ensure their optimal performance.
Try cleaning and lubricating the tracks at least twice a year. Also check the
seals and weatherstripping of the windows for any signs of wear or damage.