Ratings & Reviews for Tapcon 1/4-in x 2-3/4-in Concrete Screw Anchors 75.0 -Pack
Ratings may include incentivized customer reviews.
What Customers Are Saying
The concrete anchors are generally viewed as a high-quality and effective product for securing items to concrete surfaces. Many customers praised the anchors as being easy to use, strong, and reliable. Several reviewers highlighted the importance of using the proper drill bit size and pre-drilling the holes to ensure a secure fit. However, a few customers did experience issues, such as the screw heads stripping or the anchors not holding as expected, especially if the concrete surface was not ideal. Overall, the consensus is that the anchors are a dependable choice for concrete fastening needs when used correctly.
Customer review summary generated by AI, including incentivized reviews.These worked better than expected and easy to use. you must drill a hole in the cement first and make sure there is no left over debris in the hole and the screws go right in. follow the directions and use the right size masonry drill bit for the size of the screw. I used a hammer drill to drill the holes.
From 1_SLASH_4-in x 2-3_SLASH_4-in Concrete Screw Anchors 8.0 -Pack Verified PurchaserSweepstakes
Tapcon Concrete Anchors
Would RecommendI've used these anchors quite often & find them very reliable!
From 1_SLASH_4-in x 2-3_SLASH_4-in Concrete Screw Anchors 8.0 -Pack Sweepstakes
Great Nails for Masonry
Would RecommendWent right through wood to concrete with a strong hold
From 1_SLASH_4-in x 2-3_SLASH_4-in Concrete Screw Anchors 8.0 -Pack Verified PurchaserSweepstakes
Works great
Would RecommendUsed these to anchor our basement walls. Worked great.
Sweepstakes
Solid
Would RecommendThese anchors are amazing. I used them to anchor a bulletin board to a concrete block wall. They were very easy to use and held great. It only took one for each corner on a 3x5 bulletin board.
From 1_SLASH_4-in x 2-3_SLASH_4-in Concrete Screw Anchors 8.0 -Pack Verified PurchaserSweepstakes
Tapcon anchors
Would Recommendthey worked great. We put up sun shades and attached 2x3s to the concrete wall.
From 1_SLASH_4-in x 2-3_SLASH_4-in Concrete Screw Anchors 8.0 -Pack Verified PurchaserSweepstakes
Tapcon screws
Would RecommendYou can't use these things without a hammer drill. I've drilled several so far with mixed results. I'm anchoring some pressure treated 2x4 lumber to the basement concrete floor in support of finishing my basement. I've drilled the anchor holes 3/4 inch deeper than the screws are long and even with a hammer drill and a 3/8 bit with 8mm socket, only 10 to 15% are going in full depth. I tried something different this afternoon. I drilled 4 holes and sprayed some WD40 down the hole. This time,...
Verified PurchaserSweepstakes