Ratings & Reviews for Project Source Adjustable Color Temperature 13-in Black Indoor 1 -Light LED Tunable White Flush Mount Light with Plastic Shade

A light so good I had to buy another

I bought this exact light almost a year ago, it is bright, and was able to match the rest of my lights temperature. So when it came time to replace a different fixture this is the one I came back to. It's easy to install, doesn't flicker, and matches the one I bought a year ago perfectly. This light could only be made better by pairing it with a dimmer switch to get your home's balance of brightness and temperature. I was worried that since I bought the first one a year ago that they might have ...

Nightmare to Install

Absolute nightmare of an install. Impossible to line up the light to the bracket for starters, and once you DO get it lined up to the bracket (by some absolute miracle), there’s not enough space between the bracket and the ceiling to fully lock the light in. You basically just scuff your ceiling over and over again while asking why nothing can ever be easy. Naturally, one would think “just loosen the bracket a little and that should provide some slack”… Nope. If you loosen the bracket, then the ...

Installation frustration

My first purchase of a Project Source lighting fixture and my last. I have never encountered a smaller grounding screw than the one on this product. It is so tiny, that to get a #14, solid copper wire underneath it, you have to back it out of the hardware, to the point it is disconnected from the steel mounting plate. It is also a smaller diameter than the standard green grounding screws, so if you have some of those on hand, they won’t fit the threaded hole. Don’t buy, there are better enginee...

Nice light. Installation not nice

The fixture is nice and the option to choose desired brightness is a bonus. The installation can be improved. The fixture had to dangle from your previously tied wire in order to tie the next one. A hanging ribbon would have been nice.

Installation nightmare

very cumbersome and difficult to install.

Low profile LED light

This was perfect for our laundry room with it's low ceiling. It lights the room up great and you can adjust the color of the light, I just wish that the adjuster was on the side instead of underneath.

Don't do it

The jerk that designed this fixture should be forced to install it. Easily the most frustrating install I've ever done, and I've done alot. Wires are too short, you basically have to wire nut one and tape the hell out of it, and let the fixture dangle by it. Then ALL the wires must be jammed into the box when connected as there is no room in the fixture for the wires.