Ratings & Reviews for Project Source 12.6-in L x 0.08-in W x 12.6-in D White Shelf bracket

Buy wood to fit over the brackets.

Easy to install and shift up or down as my preference.

Super Easy To Install

Exactly what I needed but I took time to read the specifications. Be sure to hammer the brackets in the slots because this is what makes them secure.

Barcode stickers hard to remove period

The brackets and the shelving standards worked fine but they put barcode stickers on them. I had to soak them in hot soapy water to get the top of the sticker off but that left the gummy residue underneath and then I had to use WD 40 to remove the adhesive part of the sticker. Also the standards that these brackets fit did not come with screws.

Easy, Design to fit, Customizable

Associate Zak was so helpful and pleasant. See before, during and after photos. So pleased with the results

not just a light tap with a hammer..

After paying almost $5.00 per bracket you would expect the system to fit together with little to no struggle.. Oh so wrong. (I have years of experience with retail shelves and brackets) These brackets do not fit into the runners at all. You basically have to beat them into submission to fit. I purchased 14 brackets to use, and over half of them will not fit in the holes at all. This is not an 'easily adjustable' organizational solution. I would suggest making the commitment of actual shelves. ...

I really like these

Easy-Peasy. Put the studs on the wall. Insert the shelf brackets, lay the shelf on top. Done! I typically mount them on 16" studs with wood screws. I use a 24" level to get the tops to line up. Then I use the same level to get the straight vertically. As long as everything is close to level, the shelf brackets do their job well.

perfect for our laundry room

I didn't even know about these until I saw them on the shelf. The price was much cheaper than double brackets. I bought 2 x 48" tracks, 3 x 12" deep white shelves, and 6 of these brackets. When I put it up, I was thinking the wood from the shelf would be strong enough that I wouldn't need to support the middle. I was wrong. Also with just 2 brackets the shelf did seem very wobbly if I moved it from side to side. The problem was solved after I reinforced it by a middle track and supporting br...

Brackets DO NOT slide down in the wall brackets

Bought these along with the wall brackets. Mounted the wall brackets and the metal shelf brackets do not slide down but 1/32 of an inch into slot. Should have went down the 1/4 of an inch but the brackets are not cut properly. They also swing from side to side because of this. Now I have to take it down and go back to the store. I am NOT happy. This should have been fast and easy and now I have holes in my wall and still no shelves.

Floppy brackets

These brackets swing sideways. I've used shelf brackets before, and never had this problem. Is probably A problem with the holder. Wish I had spent a little more and bought the holder and brackets that have double hooks. Only after putting the shelf on these brackets and then a little weight did they stop swinging sideways.