Ratings & Reviews for Orbit Drip Irrigation Hole Punch

Makes setting a drip line easier

This product made setting up my drip line quick. The cutting and punching of the hose was effortless making the task quicker and easier to complete.

Cutter is great but hole punch had the hose holding cradle break off on the third hole. Would have taken back but I live more than 30 min. from town. Not worth the time or gas. Save your time/ money and use the direct straight punch or a drill bit of proper size.

Orbit Hole Punch and Pipe Cutter

Good product; it cut pipe perfectly! We haven't used the punch yet, but expect it will also do the job.

Disappointed Quality

Hole punch broke after using it 3 times. I intend to return it as soon as possible. The cutter works fine.

Bought this to use on 1/4" & 3/8" od tubing.

I needed something inexpensive to cut tubing for an undersink water filter system making square cuts for the push together couplers being used. Worked great for that. The next week, I needed to replace a shower faucet using 1/2" PEX tubing. This cutter is not for heavier tubing, needed a lot of hand strength & tended to crush the tubing some. Was made for smaller or lighter tubing.

Best manual hand tool ever !!

I have used several other tools and methods in the past to put in drip line and drippers. I was reluctant to spend money on a "tool" specifically to pop the holes in the line for the drippers, but now I don't know how I ever used anything else! This tool makes it SIMPLE & FAST. It's easier to use when the line is under pressure, you get a little wet but it's well worth it!!

Totally worth it

Makes the task of fixing the irrigation system so much easier using this tool. Feel like I can fix most minor issues without calling in the pros.

Great tool

as long as you use the tool for the right application it works great.. Not many to cut hard PVC pipe.

Broke the first day

This is garbage. The hole punch tool broke on the second punch. The hole it did make was almost, but not quite, big enough for the connector. I had to enlarge the hole before I was able to attach an emitter. It's going back to the store tomorrow!

Drip Irrigation Hole Punch

The pipe cutter was useless. I had hand cramps for 15 min after trying to use on a 3/4 in PVC pipe.

do not even bother.

This product must be designed for something other than standard irrigation hose. It barely put an indentation on the hose, not even close to punching a hole in it. It is on its way back to the store.

Drip irrigation punch and cutter

Have not had the set for long, therefore, I don't know how it will hold up. Until I have used it to see how it holds up, value and quality can only be given a 'good' rating. It has worked very well so far.

Required for drip irrigation

I had purchased this combo some time back but lost it so this is a replacement. Since I chose the exact same tools, I found them to be extremely useful and necessary for any medium to large scale drip installation.