Ratings & Reviews for Kobalt 1/4-in 4-1/2-in Titanium coated HSS Jobber length Twist Drill Bit
Ratings may include incentivized customer reviews.
What Customers Are Saying
Most customers praise these drill bits for sharp performance and reliable results when used in controlled applications like drill presses or light-pressure drilling of wood and aluminum. Many report successful use for pilot holes and deck screws with good penetration and longevity. However, a significant portion express frustration with premature breakage under minimal pressure, particularly in impact drills, citing brittleness and structural weakness. Some note the bits require careful handling and lower speeds to prevent failure. Overall, customers find them effective for specific applications despite durability concerns.
Customer review summary generated by AI, including incentivized reviews.snapped about about 10 holes
Would Not Recommendsnapped about about 10 holes
From 3_SLASH_16-in 3-3_SLASH_4-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
Broke after 20 cabinet pull holes
Would Not RecommendBroke quickly
From 3_SLASH_16-in 3-3_SLASH_4-in Titanium coated HSS Jobber length Twist Drill Bit Verified PurchaserVerified Pro
broke right away
first drill, snapped the tip off. said, "Aw heck, I'll try to drill it with the broken tip," and the bit bent 70°... broke out my dewalt bits instead.
Great value for the price!
Would RecommendCouldn't have finished my screening project without these babies. They're so much more durable then the screws that came with the kit. Also I like the hex shank, the screwdriver really hangs onto them when backing out of wood, instead of being buried in a board.
From 2 -Piece 1_SLASH_8-in Assorted 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
Decent for the peoce
Would Not RecommendBreak easy, come disconnected easy, short lasting through metel, decent lrice considering
From 2 -Piece 1_SLASH_8-in Assorted 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
Very good product.
From 1_SLASH_2-in 6-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
You get what you pay for
Would Not RecommendI thought it was a good price and thought because it was kobalt it would work well. It says it can be used on metal. Please dont try and drill through metal with these bits. It doesnt even get dull, ut just breaks
From 2 -Piece 1_SLASH_8-in Assorted 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
Not the best
Would Not RecommendI bought two of these drill bits I drill four holes in some 1/8 stainless steel plate. One broke on me.
From 3_SLASH_16-in 3-3_SLASH_4-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
It lasted 3 seconds and snapped off
Would Not RecommendFrom 5_SLASH_32-in 3-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
In order to make a great nail set consider using .
This helps me to set the nails where I need.
From 2 -Piece 5_SLASH_64-in Assorted 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
All good
Works well
From 3-3_SLASH_4-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
Broke with hardly any pressure...
Would Not RecommendI know when it's my fault if I break a drill. Sometimes I accidently apply too much pressure, sometimes the drill gets caught in the material. This 1/8" drill broke on its first use as soon as it made contact with soft pine. I'm getting so tired of paying high prices for junk.
From 2 -Piece 1_SLASH_8-in Assorted 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit
Like Buttah!
Would RecommendI needed a drill bit to get through 1/16" thick steel post, and a 1/4" thick metal pipe in one go. I did some research online and everything I read said a ti-coated drill bit will get through it with ease. They were not lying. With very little effort it took all of two seconds to get through both the post and pipe. Highly recommended.
From 9_SLASH_64-in 3-1_SLASH_4-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser