Ratings & Reviews for Inte-Grates 2-1/4-in x 12-in 1-way Plastic Black Floor Register

Disappearing floor vents

We have ordered and installed four of these registers. When they arrive out of the box they are just black plastic. But if you paint them to match your floor and cut a piece of flooring to go in the center, they almost disappear and blend perfectly. They are a great knockoff floor registers that cost three times as much.

Look great, big flaw

I want to use these and keep them, they look amazing and are easy to use, but one issue renders them not useable. They restrict airflow to about 25% of what you get before. My house has always been hotter upstairs than the main floor. I was able to remedy this with just a couple powered vents to even things out. After I replaced 9 vents on the main floor with these, all the sudden upstairs is 3-5 degrees colder because these push all the air to my less restrictive vents. I find myself having to ...

Amazing and simple

Looks simple, easy to clean and perfect color, super easy install took like 20 mins to setup best friend would be getting a leveler and you are ready to go.

4x10 Customized Air Vent Cover

The customized air vent cover, and I couldn’t be happier with! The craftsmanship is outstanding—the cover fits perfectly over my existing vent and instantly upgraded the look of my room. I was able to choose the exact size, color, and design to match my décor, which made all the difference. The materials feel sturdy and high-quality, and installation was a breeze. Not only does it look great, but it also functions perfectly, allowing for proper airflow while hiding the old, unattractive vent. I ...

Steel Matte Black Floor Regist

I recently upgraded to the Fittes 4x10 1-Way Steel Matte Black Floor Register, and it’s been a subtle but impactful improvement to my space. The matte black finish is sleek and modern—it adds a refined touch without drawing too much attention. Pros: High-Quality Construction: The steel feels durable and solid, with no rattling or flimsy parts. Stylish Finish: The matte black look is clean and elegant—no fingerprints or gloss glare. Good Airflow Direction: The 1-way design helps control airf...

Simple, Stylish, and Does the Job!

This 4x10 black plastic floor register is exactly what I needed—clean look, easy to pop in, and fits well. I love that it’s lightweight and won’t rust. It’s not fancy, but it works great and blends right in. Perfect for a quick, no-stress upgrade!

Very nice upgrade

Provides a sleak look to our floors. It is a bit difficult to make the correct cut to fit, but once you get it correct, it is a great upgrade to the basic floor register (previous register vs this register is pictured)

Love the look!

I love how the register looks when installed. I would definitely recommend this product. It comes with a template to use when cutting the flooring piece that goes into it. The template was easy to use and very helpful. I also had to work on the depth of the custom piece that goes into the register because my vinyl flooring was only about a quarter inch thick. The depth you need is about an inch, so you will need a spacer of some sort to get the finished tile piece flush with the top of the regi...

Nice product, has a template to cut size

Really easy to setup. Comes with a template for the size of flooring you need. I was able to cut out the needed 4x10 piece from some scrap pieces of flooring I had left from end cuts. Sturdy plastic, I am used to metal registers but this is well built and easy to install

Would work in an area with low traffic

Interesting idea. Although it seems like a brittle plastic that could break easily if stepped on. It’s also much deeper than an average vent cover so can cause problems when installing. I could only fit it in the vent that already had a new one. It hits the metal ductwork on all my other vents.

Cheap, Sharp edges on center

Holds up to a 3/4" flooring piece. If your flooring is thinner use a filler like cardboard or multiple pieces of flooring. Stepping on the vent was painful but not as bad as a Lego. I found that it's best to have the flooring center perfectly flush to the plastic edge. Air flow is definitely reduced. If you want appearance over function then buy this.

Plastic Floor Register

The register fit into my open floor register space but when I ordered it I did not realize that you need a piece of your current flooring to fit into the middle of the new floor register and that there would be a small gap all around the outside of the register. I will have to see if I have any of my current flooring that I can use. Not sure how it will look.

Stylish but Not Quite Right for My Home

I recently purchased this black plastic floor vent with the hope of upgrading the vents in my house. The installation process was a breeze, which I really appreciated. The vent was easy to place and seemed like a great option to enhance the look of our floors. However, I quickly ran into a couple of issues. First, the measurements I took for the vent didn't quite align with the actual size I received. While this is partly my fault for not double-checking, it still created an issue, as the vent ...

High end flooring vents!

This is a great product and looks so much better than a metal vent. Take your time to line up the flooring and match the grain or tile the best you can to the surrounding floor. That’s easy for new floor installs, and really hard for existing floors! Also make sure to put scrap wood as spacers under the flooring cutout. I used liquid nails adhesive to secure everything. Dry fit it to get the size right, and the height about 1/4” under the top. Then assemble with adhesive and press it in pl...

Not my cup of tea

I used it in my family room. I did not like it because you need to install a piece of wood in it to match the floor. I did not want to have to supply wood for it b

Stylish way to hide your vents in new floor

Really great product that enhanced the look of our new floors. Got rid of the old metal grate that didn't not color match the new floors. Easy to install, thought getting the proper sized piece of flooring may be tough for a typical DIYer without a table saw. Would recommend this product

Ingenious way to partially hide a floor register.

This Inte Grates drop in floor register is an interesting design; this allows one to partially hide the register by inserting a piece of your existing flooring onto the register for an almost seamless appearance. The register is designed to allow air to pass around the edges, so as to not hinder airflow.

Great product, blends into floor, very sturdy

Very nice product, sturdy and strong enough to support standing on it. Easy to installed, it comes with a template to help you cut the perfect size of flooring to insert in to the center. Pro tip: measure twice to ensure you order the correct size... mine was too small, so I will be purchasing the correct size.

Good product

This is the best option ive found for a register cover that you can put the same wood as your floor. It’s made of sturdy plastic and comes with a stencil if you need it.