Ratings & Reviews for Hunter Dempsey 44-in Noble Bronze Flush Mount Ceiling Fan With Light and Remote Control Included

Great fan!

Looks beautiful up, works well, no issues. We love how quiet it is! And how bright it can get with this one!

Beautiful 4-Blade fan- Moves a lot of air!

Awesome fan! Moves a ton of air and has great balance out of the box. The AC motor in this has a pretty loud hum, but the wind noise covers it nicely. Over all, very pleased with my purchase and Hunter fans in general! And for those wondering- you do NOT have to use the wireless remote/receiver the fan comes with at all. You can just not use the green receiver box and wire the light (blue wire) directly to a light switch and the black wire from the motor directly to a speed controlled switch (Ot...

Remote does not work, holds pairing for 2 minutes

The pairing of the remote to the receiver only last about two minutes check the battery check the wiring twice does not work very frustrating

Fan has some great features

Dempsey Noble Bronze is a nice alternative to the matte black housing, being that a lighter bronze or a gold was not available. Noise is not really noticeable on the low or medium speed and the airflow is more than efficient at these speeds. On the high speed, the noise is noticeable, but in most cases we don't need the high speed to cool down the den adequately. The brightness meets our needs in that room.

Below expectations

Very frustrating installation: 1st the first thing in the box is a 4 guide about the down rod installation, which after 10 minutes I determined didn’t even exist on this product. The hardware for this product might as well have come from a dollar store. The thread on one wore super easily leading to me wasting time trying to make it to work then a trip to but my own which had no issues. There very little guidance about where to attach the fan bracket and screws, and how to get the braided safe...

So far do good

Fans installed yesterday by my electrician (one hour, 2 techs, 4 fans 2 44 inch and 2 52 inch). Slight humming from the motors but nothing bothersome. Remotes work well and are simple to use, airflow good. Price was very reasonable, would recommend.

Parts Issue

The fan operates great. However installation was a big challenge. After installation the fan did not operate. After multiple troubleshooting I discovered the receiver was the issue. I had to use an old receiver I had from the one this was replacing . Also, the green ground wire was missing, so again I had to use the ground wire off the unit this was replacing.

Looks great. Runs well.

Looks great. Runs well. Me likey a whole lot and that's the truth.

Does not come with remote cradle

Purchased May 6 2026 - This does NOT come with the remote control cradle like the installation manual online shows. Makes it very difficult to leave the fan on and turn the light on and off as you enter/leave the room if you have to hunt for the remote in the dark. I am hoping Lowe's will make good on this and help us get a cradle. Otherwise, the fan is great and very quiet. Hardest part of installation was screwing the blades on to the fan motor because it's so hard to see the holes once the ho...

Nice Fan - Glass Globe Broken

So the installation went well. All the screws were small. Not a big deal but surprising. Even the electrical connections were relatively easy. However, I did not discover the glass globe was broken until I already had the installation complete. It operates as it should and I am hoping they will send me a new globe without having to return the fan. There are FED-X Ground labels on the box, which would explain why the glass is broken. They could break a steel box.

Merely OK

Merelt OK. The fan is noisier than expected. I also anticipated a slower lowest speed.

Dempsey with a light and remote.

The fan with a light and remote is great, however, I’m having an issue with the remittance to the fan.

Hunter fan

There is an annoying hum in all the motors of the three fans I replaced

Nice Fan

Great fan! Love the look and quiet operation. Only issue is that a light was moved from this location using screws with the light. The new fan did not come with new fan box screws. The hunt was on for the correct screws and delayed project until the correct size was found.