Ratings & Reviews for Hillman 1/4-in x 20 Zinc-plated Steel 3-prong Nut 2 -Pack
Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise these T-nuts for reliable performance and solid construction. Most highlight ease of installation, strong holding power in hardwood, and clean, accurately cut threads that allow smooth engagement. Many appreciate the zinc-plated steel durability and sturdy prongs that bite securely into wood without splitting. Reviewers consistently report the product works exactly as intended for furniture repair and DIY projects. A few note issues with softwoods or occasional damaged units, but overall customers consider them dependable fasteners worth choosing.
Customer review summary generated by AI, including incentivized reviews.Best nut
Would RecommendUsed vice bolts on a KYDEX press I use for holsters. Quality product
From 1_SLASH_4-in x 20 Zinc-plated Steel 3-prong Nut 2 -Pack Verified Purchaser
Nothing particularly. They are held in place by ba
Would RecommendWorked well with project I was working with on this day
From 5_SLASH_16-in x 18 Zinc-plated Steel 3-prong Nut Verified Purchaser
Use lock tite with this on the threads
Would RecommendIt's a good product and does exactly what I needed to put in a carriage bolt to level a table perfectly. use lock tite or it may shift causing an wobble.
OK but not all in stock
Would RecommendOk product. Just LOWES did not have 4 that I needed. I went to the other guys and got a pack of 4 for less than the two I bought here. I ended up throwing these in my junk box hopping to use them one day.
1/4-20 T-nuts for wooden bed frame project
Would RecommendWorked as intended. Makes assembly and re-assembly easier over time. Best to drill oversized hole (I used 9/32) from outside facing surface with scrap wood backer to reduce tear out; suggest adding small countersink flare on inside face to ease t-nut entry; thread longer 1/4-20 hex bolt from outside face through fender washer, thin non-marring plywood scrap, drilled board, and t-nut; tighten by hand or with drill/driver until t-nut seats into wood. Back out the longer bolt and your t-nut should ...
From 1_SLASH_4-in x 20 Zinc-plated Steel 3-prong Nut 2 -Pack Verified Purchaser
3 prong nut
Would Not RecommendI like the ability of threading a screw thru plywood to increase the mounting strength.