Ratings & Reviews for DeckForce by Grip Rite Deck Force #9 x 3-in Composite Deck Screws 64 -Per Box
Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise these deck screws for exceptional holding power on composite and wood decking, with strong satisfaction around rust-free performance, color matching to grey and brown tones, and the reverse-thread design that pulls boards tightly together. Many find them easy to install and appreciate the seamless aesthetic finish. However, some report that screw heads strip during installation with impact drivers, and several note difficulty achieving flush seating even with pre-drilling. Despite these installation challenges, most customers consider them reliable and visually superior to traditional fasteners.
Customer review summary generated by AI, including incentivized reviews.Great screws!
Would RecommendScrewed in fast to the composite boards
From Deck Force #9 x 3-in Composite Deck Screws 64 -Per Box Verified Purchaser
Handy for many things Adirondacks 1
Would RecommendFrom Deck Force #9 x 2-1_SLASH_2-in Composite Deck Screws 74 -Per Box Verified Purchaser
Deck screws
Would RecommendWorks well will trax decking
From Deck Force #9 x 2-1_SLASH_2-in Composite Deck Screws 74 -Per Box Verified Purchaser
Screws ok - bit needs to be better.
Would RecommendI had trouble with the screws. The bit that comes with the screws wore out after about 10 screws. I had bought a second pack and that lasted longer. I decided to pre-drill the holes.
From Deck Force #9 x 2-1_SLASH_2-in Composite Deck Screws 74 -Per Box Verified Purchaser
Worked great
Love the star head; very easy to use
Verified Purchaser
Not impressed with fancy screws
Would Not RecommendThese screws with their fancy threads don't always seat flush with the decking. They lose their grip going in and often don't drive flush or below the deck surface. You are left with a screwhead bump above the deck. Even if you reverse your driver to let the secondary thread pull the screw down, it doesn't drive flush with the deck surface. This happens when driving into new wood and not-so-new wood as well. I've seen all the helpful videos, and of course they show screws going right in as they'...
From Deck Force #9 x 2-1_SLASH_2-in Composite Deck Screws 74 -Per Box Verified Purchaser
Great for Mutilating Your Deck
Would Not RecommendWow. These screws completely SUCK! I’ve built more decks than I could possibly remember as a landscape pro and can say Grip Rite got this design completely wrong. Whether you predrill or not, they mutilate the composite decking and the wood joists underneath. And don’t even THINK about trying to remove one after it doesn’t seat below the surface. You’ll need a pick to pull the head up while reversing the drill. Absolute garbage fasteners! 🗑️🗑️🗑️
They drive in and then spin.
Would Not RecommendThese things are awful. Even with pre-drill they drive in to where the head meets the decking, and about 1 out of 8 just start spinning with the head still exposed above the board. $50 worth of screws are making a $2000 deck end up being sub par. I searched high and low to find any useful instructions and they basically provide nothing other than your basic how to drive a screw that is useful for a 5 year old. this company usually has good products but avoid these unless you want to ruin your pr...
I needed some 3” composite deck screws for steps
Would RecommendI liked the color and length
Hodfast
Would RecommendFrom Deck Force #8 x 1-5_SLASH_8-in Composite Deck Screws 149 -Per Box Verified Purchaser