Ratings may include incentivized customer reviews.
What Customers Are Saying
The diamond-tipped hole saw bit provides effective and efficient cutting performance on a variety of hard materials like tile, glass, and granite when used properly. Many users found it to be a durable tool that lasted for multiple uses. However, some experienced issues with the bit wearing out quickly, especially when drilling through very hard surfaces. The quality control and consistency of the product seem to be inconsistent, with some customers receiving defective or short-lived bits.
Customer review summary generated by AI, including incentivized reviews.works great
Would Recommendworks great
Good product
Worked as expexted
It did not hold up to the job
Would Not RecommendIt did not perform as stated
Always shop Lowe's to get needed job items
Would RecommendIt performed well to get the job done
Absolute garbage
Would Not RecommendThis hole saw was completely destroyed by less than 1 inch of cutting. All the diamond was gone. Kept wet and cleaned periodically, but still wore out far faster than the other brand I used for the same project.
Hi there, thank you for taking the time to provide your valued feedback. We will include your input when reviewing potential design improvements for ...

Good product
Would RecommendWorks Great
Disappointed in longevity
Did not last for second use. Water was used to keep the bit cool, however the diamond plating came off quickly when cutting through ceramic tile.
Works but doesn’t last long
Would Not RecommendWorked as expected drilling glass but didn’t last very long. I believe I drilled 8 holes in a glass bottle and it was basically done
It worked to cut through slate tile.
Would RecommendWe bought this to cut holes in slate tile. We trickled water from the garden hose onto the hole saw bit as we were cutting. It cut right through, no problem. We only had 3 holes to cut in our project so we can't speak to how well this holds up over a bigger job.
How to use it properly for it to last a long time.
Would RecommendI like that I was able to cut into hard tile.
Verified Purchaser
Not a smart purchase
Would Not RecommendI am a contractor and have used this type of cutter several times. I usually buy a certain brand from a different store. It's a red colored tool with a brand name from a city where they drink a lot of beer. Those ones last for 10-12 holes in 3/8 porcelain tile. This one worked well for one hole, started to lose its diamond on the second and failed completely half way through the third. If it was priced at $5 and you only want to cut 3 or 4 holes you could spend 10 bucks and accept the results. T...
Hi there, thank you for taking the time to provide your valued feedback. We will include your input when reviewing potential design improvements for ...

You must use water while using the tool
Would RecommendIts very easy to drill throw tiles
Quality
Would RecommendWorks great
Works one time.
Would Not RecommendUseless. Used one time and all the but came off. Leaving it bare and useless.
Hi there, thank you for taking the time to provide your valued feedback. We will include your input when reviewing potential design improvements for ...


Hi there, thank you for taking the time to provide your valued feedback. We will include your input when reviewing potential design improvements for ...