Ratings & Reviews for Ply-Bead Natural/Rough Sawn 0.3437-Inches x 48.0-Inches x 96.0-Inches SYP Plywood Panel siding

Great for ceilings

Sturdy enough for porch ceiling

Nice boards, But beware mishandling/ staples

Delivery guys do not follow directions. I found all materials tossed out on the grass sideyard instead of on the sidewalk right at the road! Some boards had busted edges but unsure if from delivery. And boards had staples in the back so check before you cut! woodfiller/paint is also noticed on some

It does the job

Cheap and effective. Needs to be painted or stained. Will splinter being cut if using a rough blade

Order wasn't ready

I ordered 4 items at 11:30 am and waited until 1:30 without any word whether the order was ready. I called the automated number given with the order confirmation and went through the process. The automated system told me the order was ready. When I got to the location around 2:00 pm they hadn't even started picking the order. Finally at 3:00 pm the order was filled. The associate that handled everything once I arrived at the store was very professional and done a great job. I ordered online beca...

Pick up location in Manning was convenient.

Great product!

It's lightweight and sturdy - I used it on my ceiling.

Garage Mudroom Locker

Used this to build a locker in our garage. Installed easily, still need to paint and finish but got the first part of the job done with this.

plybead panel

great easy way to finish interior walls

Low Quality, High Price

Had the store pick18 pieces for me to pickup-expected to have some shop wear and light damage for this type of material, not a problem as my project was going to have some waste that I could work around some damage. But, almost every sheet had damage. A lot of it was from fork lift, corners broken off from rough handling, etc. There was also a lot of manufacturing defects in the finish ply-long cracks in top layer, etc. I live 75 miles from the store in a rural area, so returning product was...

Factory cuts terrible & sheets covered w/ filler

The factory cut ends were splintered and very inconsistent. This does not allow you to be able to overlap the sheets in a seamless manor. Each joint was raised up and protruding. Every sheet was also covered with some sort of filller and would need to be sanded down. Not ideal for a rough sawn material.

Great price and looks great!

I used this inside two rooms in an outdoor kitchen, a bathroom and a storage room. I didn't need thick siding in either, so this was perfect. It looks and is easy to work with. I used 5/8" on the exposed walls, and it was rough.

Works good

Some edger where it overlaps were not cut properly but overall a good product.

Ply-Bead

High quality, durable. Used as siding for my house.

Nice exterior look

The plytanium siding adds a bit of character to the exterior of my building which is not possible with plain plywood. I like the ease of installation and the relatively inexpensive cost.

Sheets are covered in glue.

Sheets had large amounts of glue on the “finished” surface. Took approximately half an hour per sheet to remove with a belt sander and hand sander. If you’re going to sell it a premium price, then it should be a premium product.

Good product

We have used this in a few rooms of our house to add some additional character. It's pretty easy to work with and paints well. A little knotty.