Ratings & Reviews for Mount-It! MI-2789XL Triple Monitor Stand

Right Monitor Arm Can't Handle Monitor Weight

Just received this and put it together today, and the right monitor arm is slanted downwards. It was already like that before I even put my monitor on there, and now it's much worse. The left arm is fine, and is even with the center monitor, but the right one is considerably lower. And all monitors are substantially below the weight limit. Not impressed at all.

Great idea, just needs to be re-engineered.

Easy to use and mount monitors on it. The problem is, I mounted 3 exact same model 27" Displays on this triple mount and the outside display would not adjust enough to line up horizontally with the center Display, even with the center monitor at it lowest possible location The two outside monitors were 1/2 inch lower than the center one. This device is rated to hold up to 22lb displays. Mine were 8 pounds. This device just needs to be re engineered for more adjustments up and down

Think again

Couldn’t hold weight not stable or strong enough to hold 3 monitors

Another great purchase!!! Mount-It FTW!!!

I bought a second triple monitor stand because I upgraded my monitors and went from 24s to 32s. I only had to buy the new one because I did not have any plans on going larger at the time of the first purchase. (In other words, not Mount-It's fault). The big takeaway is that when it came time to upgrade, there was no hesitation to reach out to to Chris (my amazing go-to person at Mount-It) who helped ensure I got exactly what I needed for my specific setup. Again, Mount-It exceeds my expe...

Well made, but not for three 32" screens.

I bought this to mount two 27" and one 32" screens. It is well made, and will handle the screens well. The problem is that it does not have the reach necessary to mount these screens without them overlapping. It will not mount three 32" screens without major overlap. The total wingspan, with the screens facing forwards, is 54", not the 59.5" shown in the documentation.

Wobbly and one screen sags

I have this set up with 3 24" monitors and I had to add a C-clamp to the base because they would fall over. Also the right monitor will sag down a full half an inch even with the adjustments maxed out. All of the screws are tight and I have no more adjustments.

triple monitor base

Easy to setup. Base does not weight enough to hold the (older heavy) monitors. Simple push and it falls over. I made a clamp to add to the base stand to hold it on the edge of my desk.

Great for the price

Great for the price. It's worth noting that the base is quite light, but they have included a way to drill it into your desk if the weight is too much for the base unit. It's holding 3x 24\ WQHD monitors happily

Very sturdy with options to mount on desk or use stand

I was surprised at how heavy this stand is. I used it as a desk stand for three 19\ monitors. These are older LCD's so they are very heavy for what they are. I have zero worries about them toppling over with this mount.The only negative about this is the placement for the set screws to tighten the monitors after placement. The center is very difficult to tighten if the monitor is faced directly forward and I couldn't imagine how I would do it if I had to angle them up. I was able to tighten them...

good for the money

good for the money, I chopped it up for a custom application, but the price was right and it worked for what I needed.

Decent triple monitor stand for the price

I like that the middle monitor can be adjusted up/down vertically to account for slightly different sized outer monitors. My biggest issue is that both arms sag a little bit with 24\ monitors on them

I recommend this

Awesome buy. My 3 monitor system has created better production. Working perfectly. I didn't know how it would hold 3 monitors and not tip over, but it has been sturdy and I recommend it.

Its pretty good

Exactly what I needed, very good quality build parts, it let's you adjust the screens with many angle approaches, it even has a height adjustment for every screen mount so if your screens have a height difference due to a bigger frame or mount point you can adjust them all still to be the same height ( gives you an inch +/- of margin to play with) - not that common on these products.Note that if you plan not to attach the center pole to the table and simply place it as is with the base plate, yo...

Good stand

This stand works well and is sturdy and strong. However it is not big enough for wide screen 27\ monitors

Should have asked for more info

I have 3 27 wide screens. They didn't fit. Felt well built

Works fine with the stand, but not desk mounted

Overall the build quality is ok. The plastic cable management loops broke almost immediately, not a big deal. The hex joints on the arms don't stay completely stationary when tightened down fully, also not a huge deal.If you're planning on mounting straight to a desk so that you don't have to use the bulky stand, this isn't your stand. The weight of the monitors causes the stand to lean forward quite a bit and it can't be screwed any tighter without damaging the wood desk it's mounted to.Also it...

This mount i don't like that much

This mount i don't like that much, cuz monitors don't align properly and they hit each other if u try to angle them towards you...