Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise the monitor stand for its sturdy construction and ability to securely hold multiple 24-27 inch monitors without sagging. Reviewers highlight the space-saving design and cable management as major improvements to desk organization. Most find it well-built and a great value. Some note the adjustment mechanism is finicky and requires effort to balance, while several mention the base can feel unstable without permanent desk mounting. Despite these minor concerns, most customers consider it a worthwhile investment for workspace efficiency.
Customer review summary generated by AI, including incentivized reviews.Right Monitor Arm Can't Handle Monitor Weight
Just received this and put it together today, and the right monitor arm is slanted downwards. It was already like that before I even put my monitor on there, and now it's much worse. The left arm is fine, and is even with the center monitor, but the right one is considerably lower. And all monitors are substantially below the weight limit. Not impressed at all.
From mount-it.com
Wobbly and one screen sags
Would Not RecommendI have this set up with 3 24" monitors and I had to add a C-clamp to the base because they would fall over. Also the right monitor will sag down a full half an inch even with the adjustments maxed out. All of the screws are tight and I have no more adjustments.
From mount-it.com
triple monitor base
Would RecommendEasy to setup. Base does not weight enough to hold the (older heavy) monitors. Simple push and it falls over. I made a clamp to add to the base stand to hold it on the edge of my desk.
From mount-it.com
Great for the price
Great for the price. It's worth noting that the base is quite light, but they have included a way to drill it into your desk if the weight is too much for the base unit. It's holding 3x 24\ WQHD monitors happily
From mount-it.com
Very sturdy with options to mount on desk or use stand
I was surprised at how heavy this stand is. I used it as a desk stand for three 19\ monitors. These are older LCD's so they are very heavy for what they are. I have zero worries about them toppling over with this mount.The only negative about this is the placement for the set screws to tighten the monitors after placement. The center is very difficult to tighten if the monitor is faced directly forward and I couldn't imagine how I would do it if I had to angle them up. I was able to tighten them...
From mount-it.com
good for the money
good for the money, I chopped it up for a custom application, but the price was right and it worked for what I needed.
From mount-it.com
Decent triple monitor stand for the price
I like that the middle monitor can be adjusted up/down vertically to account for slightly different sized outer monitors. My biggest issue is that both arms sag a little bit with 24\ monitors on them
From mount-it.com
I recommend this
Awesome buy. My 3 monitor system has created better production. Working perfectly. I didn't know how it would hold 3 monitors and not tip over, but it has been sturdy and I recommend it.
From mount-it.com
Its pretty good
Exactly what I needed, very good quality build parts, it let's you adjust the screens with many angle approaches, it even has a height adjustment for every screen mount so if your screens have a height difference due to a bigger frame or mount point you can adjust them all still to be the same height ( gives you an inch +/- of margin to play with) - not that common on these products.Note that if you plan not to attach the center pole to the table and simply place it as is with the base plate, yo...
From mount-it.com
Should have asked for more info
I have 3 27 wide screens. They didn't fit. Felt well built
From mount-it.com
Good stand
This stand works well and is sturdy and strong. However it is not big enough for wide screen 27\ monitors
From mount-it.com
Works fine with the stand, but not desk mounted
Overall the build quality is ok. The plastic cable management loops broke almost immediately, not a big deal. The hex joints on the arms don't stay completely stationary when tightened down fully, also not a huge deal.If you're planning on mounting straight to a desk so that you don't have to use the bulky stand, this isn't your stand. The weight of the monitors causes the stand to lean forward quite a bit and it can't be screwed any tighter without damaging the wood desk it's mounted to.Also it...
From mount-it.com
This mount i don't like that much
This mount i don't like that much, cuz monitors don't align properly and they hit each other if u try to angle them towards you...
From mount-it.com
This was a great solution to having two independent monitors standing next to ...
This was a great solution to having two independent monitors standing next to one another. Not only are the two stands gone, but the monitors are raised up, creating additional desk space underneath.
From mount-it.com
Seems secure, only reason for 4 stars is when ...
Seems secure, only reason for 4 stars is when both monitors were in landscape orientation they would not line up perfectly. I switched the right to portrait orientation and my OCD was calmed.
From mount-it.com
