Ratings & Reviews for Kreg Drawer Slide Jig - Accurate Slide Positioning with Built-in Indexing Tabs

Love Kreg Tools

It is perfect. I really like the Kreg tools. They make jobs much easier.

Very helpful

These are very easy to use and make an annoying process very straight forward. I wish I had bought these years ago.

Comes in two pack makes drawer placement simple

Makes placing drawer slides very easy

With a jig, an easy installation. Smooth and sturdy close.

Great for beginners

The Kreg drawer slide jig makes installing slides much easier and more accurate. It holds everything in place so you don’t have to fight with alignment, which saved me a lot of time. Build quality is solid and it works with different slide types. The only drawback is that it can be a little tricky on face frame cabinets without clamps, so you may need to adjust your setup. Overall, very helpful tool that takes the frustration out of drawer slide installs.

Probably fine for most

I found these were tough to get to lay flush. When clamping and putting a level on it, it would be off. I ended just removing the index slides and using them for spacing but doing the rest manually with a level

Almost good enough

Good idea, however the play in this product allows a little too much misalignment to really be worthwhile.

I’ll write a review after I have used this product

First time I have ever used this product

No fuss, just accurate slider replacement

Fantastic home repair tool. You do not need ruler, tape measure, level. Nothing. This jig is terrific. Works to install styles of drawer slides. The first time I used it, it took about twenty minutes, and the drawer was in and done.

Make installing drawer slides much easier.

Made job easier and quicker

Very useful

Very helpful while installing some undermount Blum soft-close slides. My slides had to be mounted on the back of the cabinet (face frame) and these allowed me to easily level the slides so I could use both hands to perform the installation. Would have been much harder to install without these jigs.

Looks great!

Would not work for our application.

Awful

There is no level bubble in the jig, so wild guess if your off. Cheaply made plastic worth $5. Going to return.

Not worth it for installing drawer slides

When installing drawer slides, 2 important factors are ensuring the slide is level and ensuring the slide is straight. This product helps with neither of those factors. I ended up using multiple shims on the side and under the slides as they are 1/8 in thick to use for ensuring they were straight along with a small level.