Can I get Instruction for Utilitech Timer # 0149289

Reading from my copy and paraphrasing in places. Disclaimer: I have done my best to copy these instructions correctly however I make no guarantee as to their accuracy. If in doubt, these timers are inexpensive, you can buy a new one which comes with its own instruction sheet. Use these instructions at your own risk. ========================================= Buttons: Manu - Manual override, scroll between timer status options as follows: ON = Always ON OFF = Always OFF AUTO = Timer will turn on or off according to the program settings RDM = Run programs in a random order Time - Press and hold for 3 seconds to set current time. PROG - Press and hold for 3 seconds to begin setting function <+> - Increase setting <-> - Decrease setting MODE - Press and hold MODE button to scroll between the different mode settings as follows: Automatic Timer Program (icon looks like a clock) Photocell (icon looks like a crescent moon) Timer+Photocell (Both clock and moon icons) RESET - Reset all functions to factory defaults. To set the time: Hold Time button until the display begins to blink. Use the + and - keys to increase or decrease the number. Press Time again to move from Hour section to Minute section. A third press of the Time button finishes the setting and starts the clock running. To set a program: Press and hold PROG for 3 seconds to begin program setting using the "+" and "-" buttons to adjust the setting as follows: Timer operation setting: MO TU WE TH FR SA SU (program runs every day of the week) MO TU WE TH FR (program runs weekdays only) SA SU (program runs weekends only) (other options are for individual days) After setting the date, press the MANU button to adjust the hours. After setting the hours, press the MANU button again to adjust the minutes. After setting one program, press the PROG button to set another program or press TIME to store the program and exit. Note: This timer is capable of storing 8 different programs which will run in numerical order unless the unit is set to the RDM mode. Photocell setting: Press MODE button to select the photocell function. Hold the PROG button for 3 seconds to enter programming mode. Setting the date works the same as in Timer operation mode (above). Press MANU to set the program: When the screen shows "d", the Dusk on/Dawn off function is on. When the screen shows "s1" to "s12" the timer is set to be on at dusk automatically and will turn off the programmed number of hours later. For example if set to s5, the timer will switch on at dusk and off 5 hours later. Press PROG to set up additional photocell programs Once everything is set as desired, press the TIME button to make the timer operational NOTE: Once all programs have been set, the priority goes to the longest time set. Digital Timer + Photocell setting: Press the MODE button to select the Timer + Photocell function Hold the PROG button for 3 seconds to enter programming mode. Set the desired day of the week program using the + and - keys as described in the Program setting section above. Press the MANU button to enter the OFF time hour using the + and - buttons. Press the MANU button to enter the OFF time minute using the + and - buttons. Press PROG to enter additional Timer+Photocell programs or press TIME to store the program and exit.