If my basement floor has a freshly dried coat of enamel patio paint on it, can this clear coat still Be applied to it?

Thank you for your response, Nick. Previously coated floors need to be in good condition with proper adhesion to the concrete before coating Rust-Oleum EpoxyShield Clear Finish Floor Coating Kit. You can check the adhesion of the previous coating by cutting a small X in the coating using a sharp razor knife. Then firmly apply a piece of 5-inch duct tape over the center of the X cut and then pull off with a fast snap. If more than 10% of the taped area is removed, the original coating is not bonded well and needs to be removed chemically or mechanically with a grinder. - Rust-Oleum Product Support 5