Prices, Promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.

Mill Hardware Mailbox lock

RELIABILT Mill Hardware Mailbox lock

4.4
79

Does it open CCW or CW ? What are the dimensions from the cam to the front ?


Thank you for your inquiry regarding this item from Prime-Line Products. The lock turns counter clockwise. The barrel length is 5/8". You can contact the manufacturer directly with your questions regarding this item, or any other product manufactured by Prime-Line Products by calling their toll free number at (877) 649-9740, or by contacting them by email at info@primeline.net.

Was this Answer Helpful ?

Opens CCW. The unit is about 3/4" deep. Remember that there are numerous cams included that can be turned over to give you a wide variety of depths.

Was this Answer Helpful ?

It opens counter clockwise. The "cam to front" question is hard to answer. Lock is about 0.665" from door face back to where cam attaches. It includes 5 cams stamped 25, 28, 29, 30 & 34. 25 & 29 have shallow S curves with about 0.25" offsets. 25 is about 1.175" long (from pivot axis), 29 is about 1.385". 28 & 30 are very square S shaped. 28 offset is about 0.45" and 1.087" long. 30 offset is about 0.335" and 0.903" long. Add or subtract the offsets from the lock depth depending on how you mount them. 34 is L shaped and is to mate with a tab sticking out into the box with its rear surface about 0.305" behind door front. It is about 0.813" long. Pivot axis is about 0.13" below hole center so cams will extend this much less above / more below the lengths given above.

Was this Answer Helpful ?