How do I set on time and off time

Here is a DIRECT LINK for setting this unit. I have many of them and they really ARE very easy to set. http://pdf.lowes.com/useandcareguides/054732819096_use.pdf

To set the timer please follow the steps mentioned below: 1. Set a period of time for the unit to be “ON. Locate the gray pins and push them down at the marked times when the attached device should be “ON.” Each pin represents a 30-minute time interval. 2. Set the “CURRENT TIME": Rotate the entire gray push-pin dial clockwise until the arrow marked “CURRENT TIME” aligns with the current time of day on the dial. “AM” hours are highlighted in white. “PM” hours are highlighted in black 3. Set “BYPASS SWITCH”: When the switch is in the “TIMER ON” position, the unit will automatically turn your attached device on and off according to the programmed time. When the switch is in the “OUTLET ON” position, the unit will bypass the programming and your attached device will remain on. 4. Plug the unit into an electrical outlet. The unit will rest against the outlet at a slight upward angle, making it easier to see and operate the push-pin dial. 5. Attach one device to the unit. Plug the device into the outlet on the side of the unit. Please note You can set up to 48 different “ON” and “OFF” times in a 24-hour period. Pins pressed down represent the “ON” time. Pins in the up position represent “OFF” time.