how is the pvc beadboard properly installed on ceilings. can it be used in kitchens

Installation instructions are as follows: 1. Square cut ends to ensure a 90˚ cut before beginning installation. Allow 1/4” on each end for expansion. 2. With the nailing fin positioned away from the wall, face nail the first piece against one side of the ceiling. Nail the nailing fin on the first piece on maximum 16” centers. 3. Insert the next piece into the slot and continue nailing through the fin on maximum 16” centers until ceiling is completely covered. 4. Use PVC cement or OSI TeQ Bond where plank ends must be butted together. 5. The last piece will probably need its width adjusted. Measure, mark, and rip it to the desired width. 6. Face nail the last piece as close to the wall as possible. 7. Cover edges with crown or trim moulding. PVC bead board can be used in interior applications including kitchens.