How much electricity is used? What hookup is need?

The LG Styler White Programmable Fabric Steamer, Model # S3WFBN must be plugged into a dedicated 120-VAC, 60-Hz grounded outlet protected by a 15-ampere fuse or circuit breaker. It must be installed in an area where the temperature is between 50°F (10°C) and 95°F (35°C).If the ambient temperature is too low or high, performance may be affected.Do not install in direct sunlight or where the temperature may fall below 32°F (0°C). You will need to allow at least 18 in. (46 cm) in front to open the door, and at least 2 in. (5 cm) on both sides and between the back of the Styler and the wall. Allow at least 7 3/4 in. (20 cm) between the top of the Styler and any overhanging shelves or cabinets. The installation requires a grounded electrical outlet located within 2 ft. (61 cm) of either side of the appliance and a sturdy floor to support the total appliance weight of 183 lbs (83 kg). The combined weight of any other laundry appliances should also be considered...^IFV