How do i program this remote using the code search option

Hello Valued Customer, thank you for your question. 1. Manually turn on the device you wish to control. Note: The Auto Code Search process cannot be used for devices without power ON/OFF capability. Use the Direct Code Entry method in these cases. 2. Press and hold down the SETUP button on the remote until the red light on the remote control turns on. Release the SETUP button. The red light will remain on. Note: The red light will either be a small light at the top of the remote or the power ON/OFF button. 3. Press and release the device button on the remote for the type of device you wish to control, for example TV, CBL, DVD, etc. The red light will blink once and remain on. 4. With the remote pointed at the device, press and release the POWER button on the remote. The remote will send 10 different codes to the device. The red light will blink once for each code and remain on after sending the 10 codes. Did the device turn off? • If YES, go to Step 5. • If NO, repeat Step 4 to test the next 10 codes. 5. Manually turn the device back on. 6. With the remote pointed at the device, press and release the VOL + button. The remote will resend the first code of the 10 codes from Step 4. The red light will blink once and remain on