Will my remote openers in the car still work also?
5
Yes, but you may have to reprogram them if they use the smart or intellicode programing system (which means they don't use dip switches on either the remotes or motor box). If they use dip switches then you probably don't have to do any extra programming.
Was this Answer Helpful ?Yes, your hard-wired in-car (and hand-held) garage door opener should still work perfectly, BUT . . . don't be surprised (or discouraged) if, after installing the Chamberlain KLIK2U remote keypad, you must re-install your previously functional remotes, either the remote hand-helds or the hard-wired in-car types.
Was this Answer Helpful ?Yes, your regular car garage door openers should still work. The keypad just acts like an additional remote.
Was this Answer Helpful ?Yes. The keypad is actually a relatively generic keypad that you have to "learn." It doesn't have a set frequency, so you have to teach it the frequency that your garage door opener uses.
Was this Answer Helpful ?Absolutely. Using the keypad will not interfere with the use of other remotes already used with the garage door opener.
Was this Answer Helpful ?