Carry-On Trailer 4-ft x 6-ft Steel mesh Utility Multipurpose Trailer with Ramp Gate ( 1700-lb Capacity )
Is the ramp removable or will it pivot forward to lay flat inside the trailer?
10
YES The ramp will fold in with the expanded metal deck face to face so to speak on the 2025 version. One large bolt with a lock nut on each side/hinge
Was this Answer Helpful ?NO, I just returned because the tailgate cannot be removed! October 5, 2021
Was this Answer Helpful ?It’ll fold in , but not flat. Perfect setup if you want one option for hauling lawn mowers/snowblowers where you need a ramp, and also kayaks when you don’t.
Was this Answer Helpful ?To get ramp to lay flat. I cut off the two ears drilled New holes thru angle iron. Now it will lay flat forward with out removing ramp.
Was this Answer Helpful ?It will remove by leaning it back then slide it to the left off of the hinge pins .The gate weighs about 75 lbs. It will not lay forward into the trailer bed
Was this Answer Helpful ?The ramp weighs about 65 lbs . If you want to remove the ramp can be by laying back , then slide to the left off the hinge pins ...it only lays down not forward
Was this Answer Helpful ?no, the trailer tail gate does not lay inside the trailer or is it able to be removed.
Was this Answer Helpful ?The trailer tail gate will not pivot forward to lay in the bottom of the trailer, but, it is removable..
Was this Answer Helpful ?Maybe, ours will not as we have lined it with 3/4" plywood.
Was this Answer Helpful ?The gate does fold in, but it does not lay flat. Rests at maybe a 15-degree angle towards the front of the trailer. In other words... not good for anything. I would say it is not removable. Anything is possible, but I don't think you'll be re-attaching it with much ease.
Was this Answer Helpful ?