EasyHeat Roofing Tools & Accessories

Tie Down   TranzPorter Roofing Platform TP250 Lifan Engine Ladder hoists

The TP250 TranzSporter by Tie Down Safety is a ladder hoist that lifts shingles and other materials quickly and safely. The TP400 hoists up to 250 pounds at one and reaches 28 feet. The TranzSporter is a market leader and best-in-class product with its designed durability. The TranzSporter ladder hoist, sometimes called a laddervator, lifts shingles to the roof while eliminating the dangers of workers lifting by hand. The hoist and track section assembly easily and offer ease of use. The foot pedal and handle brake controls allow for easy and straightforward use while keeping workers safe with the safety mechanisms preventing falls. An optional 4’ or 8’ track extension can be added to the ladder hoist, allowing a maximum height of 44’. The TP250 TranzSporter makes for an ideal ladder hoist for moving shingles, felt, insulation, and other materials to the hard-to-reach areas. The new collapsible carriage comes with cam followers for better tracking. The carriage features an aluminum deck and flap for lightweight durability. The rolled goods bracket pins into the carriage. The TranzSporter comes in 3 different motors: Lifean gas engine, Honda gas engine, or electric motor. The solar panel saddle carriage accessory lifts solar panels without damaging the panels or the roof. Tie Down Safety maintains high standards and quality controls using quality raw materials and component parts made in the USA.

Shingle Hog   Pneumatic Shingle Remover Shingle remover

Since 2008, the patented Shingle Hog has been used by thousands of roofing contractors to tear off shingles faster, cheaper, and easier than by hand. Using the same air compressor they use for their nail gun, the tool typically tears off 17 to 20 square per hour. Designed to be used on any roof that the can be safely walked on, The Hog can be used on single layer or multi layer roofs. This durable tool is backed up by a one-year warranty.

SnowPeeler   18-in Aluminum Blade Flat-blade Snow Shovel with 240-in Aluminum Handle

With the SnowPeeler, removing snow and preventing ice dams on your roof has never been so easy, fast and safe. Use the SnowPeeler throughout the winter to prevent ice dams from forming on your roof. To keep ice dams at bay, get rid of unwanted icicles on your roof and gutters. Remove 3 to 4 feet of ridge ice form the lower edge of your roof. Keep an eye on the telltale signs of ice dams and use the SnowPeeler to quickly eliminate the many causes of ice dams!

Tie Down   TranzPorter Roofing Platform TP250 Honda Engine Ladder hoists

The TP250 TranzSporter by Tie Down Safety is a ladder hoist that lifts shingles and other materials quickly and safely. The TP400 hoists up to 250 pounds at one and reaches 28 feet. The TranzSporter is a market leader and best-in-class product with its designed durability. The TranzSporter ladder hoist, sometimes called a laddervator, lifts shingles to the roof while eliminating the dangers of workers lifting by hand. The hoist and track section assembly easily and offer ease of use. The foot pedal and handle brake controls allow for easy and straightforward use while keeping workers safe with the safety mechanisms preventing falls. An optional 4’ or 8’ track extension can be added to the ladder hoist, allowing a maximum height of 44’. The TP250 TranzSporter makes for an ideal ladder hoist for moving shingles, felt, insulation, and other materials to the hard-to-reach areas. The new collapsible carriage comes with cam followers for better tracking. The carriage features an aluminum deck and flap for lightweight durability. The rolled goods bracket pins into the carriage. The TranzSporter comes in 3 different motors: Lifean gas engine, Honda gas engine, or electric motor. The solar panel saddle carriage accessory lifts solar panels without damaging the panels or the roof. Tie Down Safety maintains high standards and quality controls using quality raw materials and component parts made in the USA.

Snow Joe   Roof rake

Snow JOE to the rescue. Prevent damage due to the heavy snow loads piled onto your roof and save on costly repairs with the snow shovel roof rake from snow JOE. Handy, easy-to-use and affordable, this durable roof rake quickly removes snow and other debris from your roof while you stand safely on solid ground. The heavy-duty aluminum rake head quickly and easily removes snow from hard-to-reach heights. Simply roll the roof rake frame on the smooth-glide rollers wheels and the 26" x 7" oversized rake head clears away heavy, packed snow. The four included extension poles provide five different length options — 26' | 22' | 18.1' | 14.2' | 10.3' — to suit the tallest or shortest roof. And weighing just 5 lbs, this ultra-lightweight, durable winter essential is easy to maneuver. So, when your roof is feeling the weight of winter: go with Joe®. RJ207M snow shovel roof rake from snow JOE®. Get equipped®.

Amerimax   Metal Bender Hand Break Tool Flashing bender

This tool has a variety of uses and will help any roofing or gutter project. Use them to hem edges or custom trim, create step flashing, or work roll flashings into custom shapes. They come with standard 3-1/2-in wide flat blades but you can purchase other 7-in and 10-in blades. Built with a convenient storage clasp.

Tie Down   TranzVolt Roofing Platform, (platform only) Ladder hoists

Updated TranzVolt G2 Roofing Kits by Tie Down is an amazing improvement over the previous models. With an extended warranty of 2 years, the TranzVolt G2 system is designed to hold up to the demanding jobsite conditions. The TranzVolt G2 now utilizes AmSteel-Blue high-performance 12-strand single braid of 100% Dyneema® fiber cable. AmSteel Blue high-performance Dyneema fiber cable has extremely low stretch, superior flex fatigue, and wear resistance. The eco-friendly TranzVolt G2 eliminates the need for the messy and costly life cycle use of fuel and oil. The Roofing Kit carries material as high as 44 ft. at a rate of 2 ft. per second. The TranzVolt can reach the height of a two-story building in under 25 seconds. Using two standard DeWalt Brand 20V batteries or Milwaukee Brand 18V rechargeable batteries, the roofing Kit offers a full 8 hours while lifting up to 250 lbs. Lift material such as shingles, rolled goods, tools and bulk roofing materials. This product is a great tool for lifting material in tight spots or when low noise ordnances are being enforced.

Tie Down   TranzVolt Solar Tilt Platform (platform only) Ladder hoists

The updated TranzVolt G2 surpasses previous models. With an extended two-year warranty, the TranzVolt G2 system is designed to withstand demanding job site conditions. This eco-friendly and cost-efficient product now utilizes AmSteel-Blue high-performance 12-strand single braid of 100% Dyneema® fiber cable, which has extremely low stretch, superior flex fatigue, and wear resistance, and no longer requires fuel and oil. The TranzVolt G2 Solar Tilt Kit is a great tool for lifting materials, such as solar panels, plywood, windows, and doors, in tight spots or when low-noise ordinances are being enforced. It carries material 44 ft. high at a rate of 2 ft. per second, reaching the height of a two-story building in under 25 seconds. Using two standard Milwaukee Brand 18V rechargeable batteries, the Solar Tilt Kit lifts up to 250 lbs. for eight hours. When the Solar Tilt Carriage reaches the top of the track, it pivots to allow workers to safely remove material.

Amerimax   Metal Bender Blades Flashing bender

This accessory kit containing the 7 In. and 10 In. blades is a great way to increase the metal bender tools job capacity. With these wider blades you can create larger step flashings or custom drip edges. Also great for doing hobby projects or household repairs.

Snow Joe   Roof rake

Heavy snow and ice dams causing havoc on your house? Don’t let mother nature ruin your roof. Prevent damage due to heavy snow loads piled onto your roof and save on costly repairs with Snow Joe® Roofer Joe – a handy, easy-to-use and affordable roof rake that quickly lets you remove snow, wet leaves and other debris from your roof while standing safely on solid ground. Roofer Joe model RJ205M boasts an innovative Twist-n-Lock telescoping pole that quickly and easily adjusts from 6.2 Ft. to a whopping 21 Ft. for even greater overhead reach to quickly and safely lighten the load without the need for a ladder. And at just 5.7 lbs, Roofer Joe is ultra-lightweight, durable and easy to handle. Its oversized aluminum blade rake head measures 6-inch wide by 25-inch long for maximum clearing power with each pass. Get equipped® for winter cleanup with Roofer Joe and defend your home when winter strikes!

Tie Down   TranzVolt solar Platform Pro Kit Dewalt Ladder hoists

The updated TranzVolt G2 surpasses previous models. With an extended two-year warranty, the TranzVolt G2 system is designed to withstand demanding job site conditions. This eco-friendly and cost-efficient product now utilizes AmSteel-Blue high-performance 12-strand single braid of 100% Dyneema® fiber cable, which has extremely low stretch, superior flex fatigue, and wear resistance, and no longer requires fuel and oil. The TranzVolt G2 Solar Tilt Kit is a great tool for lifting materials, such as solar panels, plywood, windows, and doors, in tight spots or when low-noise ordinances are being enforced. It carries material 44 ft. high at a rate of 2 ft. per second, reaching the height of a two-story building in under 25 seconds. Using two standard DeWalt Brand 20V batteries rechargeable batteries, the Solar Tilt Kit lifts up to 250 lbs. for eight hours. When the Solar Tilt Carriage reaches the top of the track, it pivots to allow workers to safely remove material.

Tie Down   TranzPorter Roofing Platform TP400 Lifan Engine Ladder hoists

The TP400 TranzSporter by Tie Down Safety is a ladder hoist that quickly and safely lifts shingles and other materials. The TP400 hoists up to 400 pounds at one and reaches 28 feet. The TranzSporter is a market leader and best-in-class product with its designed durability. The TranzSporter ladder hoist, sometimes called a laddervator, lifts shingles to the roof while eliminating the dangers of workers lifting by hand. The hoist and track section assembly easily and offer ease of use. The foot pedal and handle brake controls allow for easy and straightforward use while keeping workers safe with the safety mechanisms preventing falls. An optional 4’ or 8’ track extension can be added to the ladder hoist, allowing a maximum height of 44’. The TP400 TranzSporter makes for an ideal ladder hoist for moving shingles, felt, insulation, and other materials to the hard-to-reach areas. The new collapsible carriage comes with cam followers for better tracking. The carriage features an aluminum deck and flap for lightweight durability. The rolled goods bracket pins into the carriage. The TranzSporter comes in 3 different motors: Lifean gas engine, Honda gas engine, or electric motor. The solar panel saddle carriage accessory lifts solar panels without damaging the panels or the roof. Tie Down Safety maintains high standards and quality controls using quality raw materials and component parts made in the USA.

Tie Down   TranzVolt Solar Tilt Platform Pro Kit Milwaukee Ladder hoists

The updated TranzVolt G2 surpasses previous models. With an extended two-year warranty, the TranzVolt G2 system is designed to withstand demanding job site conditions. This eco-friendly and cost-efficient product now utilizes AmSteel-Blue high-performance 12-strand single braid of 100% Dyneema® fiber cable, which has extremely low stretch, superior flex fatigue, and wear resistance, and no longer requires fuel and oil. The TranzVolt G2 Solar Tilt Kit is a great tool for lifting materials, such as solar panels, plywood, windows, and doors, in tight spots or when low-noise ordinances are being enforced. It carries material 44 ft. high at a rate of 2 ft. per second, reaching the height of a two-story building in under 25 seconds. Using two standard Milwaukee Brand 18V rechargeable batteries, the Solar Tilt Kit lifts up to 250 lbs. for eight hours. When the Solar Tilt Carriage reaches the top of the track, it pivots to allow workers to safely remove material.