Pools
4 results
- •The pump will automatically turn on when water has been detected at 2 ''. When the pump remove water to approximately 2/5 ",
- •The pump moves up to 2250 gallons per hour, Bottom suction design can remove water down to 3/4 ".
- •Equipped with 25 ft three-prong plug power cord, which could plug into any standard 115 volt wall outout; 1-1/4” NPT discharge and 3/4” garden hose adapter with check valve provide more convenience to operate and use.
4.7
- •Water motion sensor – be prepared with the PoolEye immersion pool alarm with its underwater motion sensor, PoolEye provides an extra layer of protection when it comes to pool safety works for pools up to 20’ x 40’ (certified for pools up to 16’ x 32’)
- •Easy to install – the PoolEye pool alarm is battery powered and easy to install it must be fixed to the deck or top rail of the pool to ensure it cannot be removed, and it must be installed using the supplied hardware
- •Fewer false alarms – this water motion sensor features sub-surface wave detection that will not pick up movement from rain or wind, meaning there are fewer false alarms the 85 dB alarm is triggered when an object as light as 15 lb is detected
- •Water motion sensor – be prepared and armed with the PoolEye immersion pool alarm with its underwater motion sensor, PoolEye provides an extra layer of protection when it comes to pool safety
- •Easy to install – the PoolEye pool alarm is battery powered and easy to install with all hardware included, it quickly installs under the top ledge of steel wall pools plus, the adjustable sensitivity switch allows you to customize your experience
- •Fewer false alarms – the water motion sensor features sub-surface wave detection that will not pick up movement from rain or wind, meaning there are fewer false alarms the alarm is triggered when an object as light as 15 lb is detected