Interior/Exterior Surface Repair

CalFlor   Hard Surface Repair 1 Fluid ounce(s) Multi color Multi-surface repair kit

The hard surface repair kit was developed as an easy customized repair solution for every hard surface in a home or workspace. This kit allows you to repair many different types of damage for wood, laminate, stone, tile, LVT, WPC and vinyl on flooring, countertops, cabinets, molding and furniture. The hard surface repair kit contains nine different pigments to allow for endless color combinations, all assisted by the included 78 color formulas and instructions customized for virtually any hard surface. The beige acrylic based putty is designed to fill the damage with a strong bond and flex along with the floor in its changing conditions. While the white acrylic based putty is designed to fill the damaged area with a hard, resilient surface. Fillers hold fast and will not break up or pop out of the repair. The enclosed booklet includes both simplified and detailed instructions for repairing damage, as well as tips on applying an easy grain or marbling effect. Great for DIY and professionals. Kit includes: beige putty, white putty, 9 pigments, lacquer, 3 mixing bowls, 2 stir sticks, 2 measuring boards, 2 spatulas, 2 graining sticks, 2 lacquer brushes, 78 color formulas, detailed instructions.

CalFlor   ColorSeal Walnut

ColorSeal flexible sealant is designed to help protect most hard surfaces by sealing perimeter expansion spaces, edges, joints, gaps and holes. This formula is long lasting and water-resistant, sealing out moisture in high risk areas such as kitchen and bathroom floors or doorways and laundry rooms. ColorSeal is great for filling around pipes, wires, door jambs, nail holes, miscues and joints during installation; making it a great addition to any toolbox. It can even be used to seal backsplash edges and seams. Available in 6 colors, ColorSeal is designed to coordinate with any project.

Surface Repair   1 Pint(s) White Bath Tub and Shower Anti-slip coating

Help keep your employees and loved ones safe on designated surfaces with our anti-slip coating kit, without having to completely refinish the entire surface. This kit is designed for applications where a patch area or a non-slip/anti-slip surface area is clearly defined.

Slip Free Floor   Anti-Slip Floor Treatment 1 Gallon(s) Clear Anti-slip coating

Slip Free Floor is a non-slip solution for safer floors. It's a clear, liquid treatment that microscopically treats the surface of your floor or fixture, enhancing the natural grip through the natural treads within the surface material. Slip Free Floor is an easy DIY application that significantly increases the Coefficient of Friction (C.O.F.) on most wet, natural surfaces to a level considered safe per industry standards. For Indoor/Outdoor surfaces: bathrooms, showers, tubs, tile, terrazzo, concrete, stone, pools, spas, garage, and kitchen.

ELMER'S   Fluid ounce(s) Clear Wood stabilizer

Protects and strengthens damaged wood surfaces. Seals and hardens dry-rotted wood. Easy one-coat solution. Solvent-free with no odor. For interior and exterior use.

PC Products   PC-Rot 1.5-Gallon (s) Dries Amber Wood Hardener

PC-Rot terminator is structural wood hardener designed to strengthen decayed or rotted wood. The mixture is a low viscosity liquid that penetrates porous surfaces filling and sealing voids with an epoxy that cures to a hard but durable component. PC-Rot terminator is useful for replacement of missing wood fibers or wood resin. PC-Rot terminator fills the voids in the wood with an elastomer that has strength greater than wood. PC-Rot terminator acts as a binder that glues the wood fibers together. The wood fibers become much stronger in combination with the epoxy elastomer. PC-Rot terminator contains 100 percent active ingredients and does not contain solvents which may evaporate and cause shrinkage. The cure rate in the thicker sections is faster than in the thin sections. The greater the temperature, the faster the cure time. PC-Rot terminator cure can be accelerated using a light Bulb or other gentle heat source. The cure rate is halved for every 20 degree F increase. After cure (roughly 24 hours) fill in missing pieces with PC woody paste epoxy. One unit of 24 Oz. will seal 50 to 100 square feet of deck as a sealer. For severely rotted wood, one unit will treat 500 to 2500 cubic inches. The amount of usage depends on the porosity of wood. Damp wood that is heavy with water will not accept the maximum amount of the mixture. PC-Rot terminator can not displace water in wood. Work time: 60 minutes. Thin film set: 12 hours. Cure for service: 24 hours. Maximum cure: 7 day. Compressive modulus: 230000 psi. Compressive yield strength: 6500 psi. Tensile strength: 4500 psi. Tensile modulus: 210000 psi. Tensile elongation at break: 12 percent. Flexural strength: 9500 psi. Flexural modulus: 300000 psi. Hardness shored: 78. Mar resistance: 1.05 kg.

PC Products   PC-Rot 24-oz Dries Amber Wood Hardener

PC-Rot Terminator is structural wood hardener designed to strengthen decayed or rotted wood. The mixture is a low viscosity liquid that penetrates porous surfaces filling and sealing voids with an epoxy that cures to a hard but durable component. PC-Rot Terminator is useful for replacement of missing wood fibers or wood resin. PC-Rot Terminator fills the voids in the wood with an elastomer that has strength greater than wood. PC-Rot Terminator acts as a binder that glues the wood fibers together. The wood fibers become much stronger in combination with the epoxy elastomer. PC-Rot Terminator contains 100 percent active ingredients and does not contain solvents which may evaporate and cause shrinkage. The cure rate in the thicker sections is faster than in the thin sections. The greater the temperature, the faster the cure time. PC-Rot Terminator cure can be accelerated using a light bulb or other gentle heat source. The cure rate is halved for every 20 degree F increase. After cure (roughly 24 hours) fill in missing pieces with PC Woody paste epoxy. One unit of 24 ounces will seal 50 to 100 square feet of deck as a sealer. For severely rotted wood, one unit will treat 500 to 2500 cubic inches. The amount of usage depends on the porosity of wood. Damp wood that is heavy with water will not accept the maximum amount of the mixture. PC-Rot Terminator can not displace water in wood. Work time: 60 minutes. Thin film set: 12 hours. Cure for service: 24 hours. Maximum cure: 7 day. Compressive modulus: 230000 psi. Compressive yield strength: 6500 psi. Tensile strength: 4500 psi. Tensile modulus: 210000 psi. Tensile elongation at break: 12 percent. Flexural strength: 9500 psi. Flexural modulus: 300000 psi. Hardness shored: 78. Mar resistance: 1.05 Kg.

TimberTech   0.5 Fluid ounce(s) White Multi-surface repair kit

This kit includes perfectly matched paint and one jig bracket to ensure easy installation and add the ultimate finished touch to your Impression Rail Express railing system.