Lighting Timer Accessories

TORK   4 -Pack Residential Lighting Timer Tripper pins

Adding set points to your mechanical timer has never been easier. Two on and two off trippers are included and can be used to replace missing trippers or simply add extra set points to your mechanical timer. The tripper pins are made from steel, designed to last the life of your timer and fit all 24 hour TORK 1100 series mechanical timers.

Intermatic   4 -Pack Residential Lighting Timer Tripper pins

Did you lose something? Use these tripper pins to replace missing pins or add extra set points to your mechanical time switch. The pins fit all Intermatic T100 series time switches, as well as the WH40 electric water heater time switch.

GE   T8 2 -Bulb Residential Fluorescent light ballast

GE residential grade electronic ballasts are designed residential use only on 120 volt circuits. They feature instant start and quiet operation. Replace magnetic ballasts with electronic ballasts that use less energy. Use this GE 120RES electronic ballast in T8 (1-inch diameter) 2 or 1 bulb residential fixtures that are designed for F32T8 48-inch fluorescent bulbs.

GE   T8 4 -Bulb Residential Fluorescent light ballast

A global leader in the lighting industry, GE Lighting has offered professional and consumer lighting solutions for over 100 years.

GE   T12 2 -Bulb Residential Fluorescent light ballast

A global leader in the lighting industry, GE Lighting has offered professional and consumer lighting solutions for over 100 years.

GE   T8 4 -Bulb Commercial Fluorescent light ballast

GE ProLine commercial grade multi-volt electronic ballasts are designed for commercial and residential use. They're instant start and handle voltage 120V through 277V. GE ProLine ballasts also feature arc-guard protection and fully parallel independent bulb operation. If one fluorescent bulb fails, all the others in the system stay lit. Use this GE ProLine 432MAX-G-N ballast in T8 (1-inch diameter) 4 or 3 bulb fixtures that are designed for F32T8 and F28T8 48-inch fluorescent bulbs.

Harbor Breeze   AA 1.2 -Volt Rechargeable Nickel metal hydride (NiMH) Landscape Lighting Batteries

Harbor Breeze 4-pack replacement nickle-metal-hydrid batteries for most landscape lights, AA 900 mAh.

TORK   Black Wire-in Light sensor

Through-hole mount dusk-to-dawn photo control ideal for residential outside post light control and able to be mounted into standard outlet box, post lamp pole and wall pack fixtures. Thermal sensor eliminates the load temporarily switching off due to car headlights, lightning or another temporary light source. Locking nut and washer gasket help keep moisture from penetrating photo control device. Requires a minimum 5/8 In. through-hole for proper mounting and wires should mount down when properly installed.

Style Selections   Mix and Match 1 -Light Bronze Traditional Linear Mini Outdoor Hanging Recessed to pendant light converter kit

Convert your recessed light to a mini pendant, as easy as screwing in a light bulb. This fixture is damp rated, ideal for your kitchen, porch or gazebo. For a completely customized look, simply pair with your choice of mini pendant shades.

GE   Grow 60 -Watt EQ A19 Balanced spectrum Medium base (E-26) LED Grow Light Bulb

Grow Light LED with balanced light spectrum for seeds and greens is designed to fit your plant's growth stage. Grow Light uses a balanced spectrum with a red: blue ratio inspired by best practices of professional growers. The balanced spectrum allows not only chlorophyll but also other plant pigments to optimize their light harvesting. Compared to typical purple grow lights, the light features high PPF or photosynthetic photon flux to provide more light for photosynthesis and growth. The white light appears more natural to the human eye, so you can appreciate your plant's beauty and spot pests or discolorations to help keep your plants healthy. Use the balanced light spectrum with high light plants like tomatoes and peppers and low light plants like leafy greens and herbs throughout their growing cycle.

GE   T12 2 -Bulb Commercial Fluorescent light ballast

GE ProLine commercial grade multi-volt electronic ballasts are designed for commercial and residential use. They're rapid start and handle voltage 120V through 277V. GE ProLine ballasts also feature arc-guard protection and fully parallel independent bulb operation. If one fluorescent bulb fails, all the others in the system stay lit. Use this GE ProLine 260ISMV-N ballast in T12 (1-1/2-inch diameter) 2 or 1 bulb fixtures that are designed for F96T12 96-inch fluorescent bulbs.

GE   2 -Pack White Lamp holder

GE's Fluorescent Sockets provide a high-quality replacement option for fluorescent fixtures. Use these low-profile BP/LP fluorescent lamp holders with T8 (1-inch diameter) and T12 (1-1/2-inch diameter) bi-pin fluorescent light bulbs.

TORK   Black Wire-in Light sensor

Conduit mount photo control ideal for providing dusk-to-dawn lighting control and ultimately saving energy. Light sensor located at top of photo control to provide accurate directional adjustment and avoid artificial light sources from influencing operation. Thermal light sensor eliminates the load temporarily switching off due to car headlights, lightning or another temporary light source. Great for exterior lighting including landscape and pathways.